Class TLcdGML32Circle

All Implemented Interfaces:
ILcdDataObject, ILcdBounded, ILcdCircle, ILcdCircleBy3Points, ILcdCircularArc, ILcdCircularArcBy3Points, ILcdCompositeCurve, ILcdCurve, ILcdRing, ILcdShape, ILcd2DEditableCircleBy3Points, ILcd2DEditableCircularArcBy3Points, ILcd2DEditableShape, ILcdCloneable, ILcdDeepCloneable, Serializable, Cloneable

public class TLcdGML32Circle extends TLcdGML32Arc implements ILcd2DEditableCircleBy3Points
A Circle is an arc whose ends coincide to form a simple closed loop. The three control points shall be distinct non-co-linear points for the circle to be unambiguously defined. The arc is simply extended past the third control point until the first control point is encountered.
Since:
10.0
See Also:
  • Field Details

    • INTERPOLATION_ATTR_PROPERTY

      public static final TLcdDataProperty INTERPOLATION_ATTR_PROPERTY
      Data property that maps to the interpolation attribute. The possible values for this property are instances of ELcdGML32CurveInterpolation.
    • NUM_ARC_PROPERTY

      public static final TLcdDataProperty NUM_ARC_PROPERTY
      Data property that maps to the numArc attribute. The possible values for this property are instances of Long.
    • POS_GROUP_PROPERTY

      public static final TLcdDataProperty POS_GROUP_PROPERTY
      Data property that maps to the choice between the pos and pointProperty and pointRep and posList and coordinates elements. The possible values for this property are instances of
    • NUM_DERIVATIVE_INTERIOR_PROPERTY

      public static final TLcdDataProperty NUM_DERIVATIVE_INTERIOR_PROPERTY
      Data property that maps to the numDerivativeInterior attribute. The possible values for this property are instances of long.
    • NUM_DERIVATIVES_AT_END_PROPERTY

      public static final TLcdDataProperty NUM_DERIVATIVES_AT_END_PROPERTY
      Data property that maps to the numDerivativesAtEnd attribute. The possible values for this property are instances of long.
    • NUM_DERIVATIVES_AT_START_PROPERTY

      public static final TLcdDataProperty NUM_DERIVATIVES_AT_START_PROPERTY
      Data property that maps to the numDerivativesAtStart attribute. The possible values for this property are instances of long.
  • Constructor Details

    • TLcdGML32Circle

      public TLcdGML32Circle()
    • TLcdGML32Circle

      public TLcdGML32Circle(TLcdDataType aType)
    • TLcdGML32Circle

      public TLcdGML32Circle(ILcdModelReference aModelReference)
      Constructs a new circle and initializes its posGroup with a TLcdGML32DirectPositionList for the given model reference
      Parameters:
      aModelReference - the model reference for this circle
      See Also:
    • TLcdGML32Circle

      public TLcdGML32Circle(double aX1, double aY1, double aX2, double aY2, double aX3, double aY3, ILcdModelReference aModelReference)
      Constructs a new circle with the given parameters.
      Parameters:
      aX1 - X-coordinate of the start point
      aY1 - Y-coordinate of the start point
      aX2 - X-coordinate of the first intermediate point
      aY2 - Y-coordinate of the second intermediate point
      aX3 - X-coordinate of the third intermediate point
      aY3 - Y-coordinate of the third intermediate point
      aModelReference - the model reference for this circle
      See Also:
    • TLcdGML32Circle

      public TLcdGML32Circle(TLcdDataType aDataType, ILcdModelReference aModelReference)
      Constructs a new circle and initializes its posGroup with a TLcdGML32DirectPositionList for the given model reference
      Parameters:
      aDataType - the data type for this circle
      aModelReference - the model reference for this circle
      See Also:
  • Method Details

    • moveStartPoint2D

      public void moveStartPoint2D(double aX, double aY)
      Description copied from interface: ILcd2DEditableCircularArcBy3Points
      Moves the start point to the given point in the 2D space. Only the first two dimensions of the ILcdShape are considered. The third dimension is left unchanged.
      Specified by:
      moveStartPoint2D in interface ILcd2DEditableCircleBy3Points
      Specified by:
      moveStartPoint2D in interface ILcd2DEditableCircularArcBy3Points
      Overrides:
      moveStartPoint2D in class TLcdGML32Arc
      Parameters:
      aX - the x coordinate of the point.
      aY - the y coordinate of the point.
    • moveFirstIntermediatePoint2D

      public void moveFirstIntermediatePoint2D(double aX, double aY)
      Description copied from interface: ILcd2DEditableCircleBy3Points
      Moves the first intermediate point to the given point in the 2D space. Only the first two dimensions of the ILcdShape are considered. The third dimension is left unchanged.
      Specified by:
      moveFirstIntermediatePoint2D in interface ILcd2DEditableCircleBy3Points
      Parameters:
      aX - the x coordinate of the point.
      aY - the y coordinate of the point.
    • moveSecondIntermediatePoint2D

      public void moveSecondIntermediatePoint2D(double aX, double aY)
      Description copied from interface: ILcd2DEditableCircleBy3Points
      Moves the second intermediate point to the given point in the 2D space. Only the first two dimensions of the ILcdShape are considered. The third dimension is left unchanged.
      Specified by:
      moveSecondIntermediatePoint2D in interface ILcd2DEditableCircleBy3Points
      Parameters:
      aX - the x coordinate of the point.
      aY - the y coordinate of the point.
    • translateStartPoint2D

      public void translateStartPoint2D(double aDeltaX, double aDeltaY)
      Description copied from interface: ILcd2DEditableCircularArcBy3Points
      Translates the start point from its current position over the given translation vector in the 2D space. Only the first two dimensions of the points are considered. The third dimension is left unchanged.
      Specified by:
      translateStartPoint2D in interface ILcd2DEditableCircleBy3Points
      Specified by:
      translateStartPoint2D in interface ILcd2DEditableCircularArcBy3Points
      Overrides:
      translateStartPoint2D in class TLcdGML32Arc
      Parameters:
      aDeltaX - the x coordinate of the translation vector.
      aDeltaY - the y coordinate of the translation vector.
    • translateFirstIntermediatePoint2D

      public void translateFirstIntermediatePoint2D(double aDeltaX, double aDeltaY)
      Description copied from interface: ILcd2DEditableCircleBy3Points
      Translates the first intermediate point from its current position over the given translation vector in the 2D space. Only the first two dimensions of the points are considered. The third dimension is left unchanged.
      Specified by:
      translateFirstIntermediatePoint2D in interface ILcd2DEditableCircleBy3Points
      Parameters:
      aDeltaX - the x coordinate of the translation vector.
      aDeltaY - the y coordinate of the translation vector.
    • translateSecondIntermediatePoint2D

      public void translateSecondIntermediatePoint2D(double aDeltaX, double aDeltaY)
      Description copied from interface: ILcd2DEditableCircleBy3Points
      Translates the second intermediate point from its current position over the given translation vector in the 2D space. Only the first two dimensions of the points are considered. The third dimension is left unchanged.
      Specified by:
      translateSecondIntermediatePoint2D in interface ILcd2DEditableCircleBy3Points
      Parameters:
      aDeltaX - the x coordinate of the translation vector.
      aDeltaY - the y coordinate of the translation vector.
    • getFirstIntermediatePoint

      public ILcdPoint getFirstIntermediatePoint()
      Description copied from interface: ILcdCircleBy3Points
      Returns the first intermediate point of this circle.
      Specified by:
      getFirstIntermediatePoint in interface ILcdCircleBy3Points
      Returns:
      the first intermediate point of this circle.
    • getSecondIntermediatePoint

      public ILcdPoint getSecondIntermediatePoint()
      Description copied from interface: ILcdCircleBy3Points
      Returns the second intermediate point of this circle.
      Specified by:
      getSecondIntermediatePoint in interface ILcdCircleBy3Points
      Returns:
      the second intermediate point of this circle.
    • getRadius

      public double getRadius()
      Description copied from interface: ILcdCircularArc
      Returns the radius of this ILcdCircularArc.
      Specified by:
      getRadius in interface ILcdCircle
      Specified by:
      getRadius in interface ILcdCircularArc
      Overrides:
      getRadius in class TLcdGML32Arc
      Returns:
      the radius of this ILcdCircularArc.
    • getCenter

      public ILcdPoint getCenter()
      Description copied from interface: ILcdCircularArc
      Returns the center of this ILcdCircularArc.
      Specified by:
      getCenter in interface ILcdCircle
      Specified by:
      getCenter in interface ILcdCircularArc
      Overrides:
      getCenter in class TLcdGML32Arc
      Returns:
      the center of this ILcdCircularArc.
    • getArcAngle

      public double getArcAngle()
      Description copied from interface: ILcdCircularArc
      Returns the angle over which this ILcdCircularArc extends (in degrees). The angle is positive counter-clockwise.
      Specified by:
      getArcAngle in interface ILcdCircularArc
      Overrides:
      getArcAngle in class TLcdGML32Arc
      Returns:
      the angle over which the arc extends (in degrees). The angle is positive counter-clockwise.
    • getStartPoint

      public ILcdPoint getStartPoint()
      Description copied from interface: ILcdCurve
      Retrieves the start point of the curve.

      This is equivalent to computePointSFCT(0).

      Specified by:
      getStartPoint in interface ILcdCompositeCurve
      Specified by:
      getStartPoint in interface ILcdCurve
      Overrides:
      getStartPoint in class TLcdGML32Arc
      Returns:
      the start point of the curve
    • getEndPoint

      public ILcdPoint getEndPoint()
      Description copied from interface: ILcdCurve
      Retrieves the end point of the curve.

      This is equivalent to computePointSFCT(1).

      Specified by:
      getEndPoint in interface ILcdCompositeCurve
      Specified by:
      getEndPoint in interface ILcdCurve
      Overrides:
      getEndPoint in class TLcdGML32Arc
      Returns:
      the end point of the curve
    • getStartTangent2D

      public double getStartTangent2D()
      Description copied from interface: ILcdCurve
      Returns the angle of the curve's tangent at the start point, in degrees counterclockwise from the direction at 3 o'clock.

      The tangent orientation is from the start point towards the rest of the shape.

      This is the same as getTangent2D(0).

      Specified by:
      getStartTangent2D in interface ILcdCurve
      Overrides:
      getStartTangent2D in class TLcdGML32Arc
      Returns:
      the curve's angle in the start point
    • getEndTangent2D

      public double getEndTangent2D()
      Description copied from interface: ILcdCurve
      Returns the angle of the curve's tangent at the end point, in degrees counterclockwise from the direction at 3 o'clock.

      The tangent orientation is from the end point, away from the curve before it.

      This is the same as getTangent2D(1).

      Specified by:
      getEndTangent2D in interface ILcdCurve
      Overrides:
      getEndTangent2D in class TLcdGML32Arc
      Returns:
      the curve's angle in the end point
    • getTangent2D

      public double getTangent2D(double aParam)
      Description copied from interface: ILcdCurve
      Returns the angle of the curve's tangent in the point defined by the given parameter, in degrees counterclockwise from the direction at 3 o'clock.

      The tangent orientation is from the point at parameter aParam towards the rest of the shape.

      Specified by:
      getTangent2D in interface ILcdCurve
      Overrides:
      getTangent2D in class TLcdGML32Arc
      Parameters:
      aParam - a value of the closed interval [0,1]
      Returns:
      the curve's angle in the point defined by the given parameter
    • getLength2D

      public double getLength2D(double aParam1, double aParam2)
      Description copied from interface: ILcdCurve
      Returns the length between two points of the curve, defined by the given parameters.
      • When aParam1 == aParam2, the length is 0.
      • When aParam1 == 0 and aParam2 == 1, the length is the whole length of the curve.
      • When aParam1 > aParam2, the length is (aParam1 to 1) + (0 to aParam2).
      Specified by:
      getLength2D in interface ILcdCurve
      Overrides:
      getLength2D in class TLcdGML32Arc
      Parameters:
      aParam1 - a value of the closed interval [0,1]
      aParam2 - a value of the closed interval [0,1]
      Returns:
      the length of the curve.
    • computePointSFCT

      public void computePointSFCT(double aParam, ILcd3DEditablePoint aPointSFCT)
      Description copied from interface: ILcdCurve
      Computes a point of the curve, defined by the given parameter.
      Specified by:
      computePointSFCT in interface ILcdCurve
      Overrides:
      computePointSFCT in class TLcdGML32Arc
      Parameters:
      aParam - a value of the closed interval [0,1]
      aPointSFCT - the point to store the computed curve point in
    • getInterpolation

      public String getInterpolation()
      Description copied from interface: ILcdCurve
      Returns the interpolation method used by this curve.

      A set of predefined constants are defined in this interface, which are used by the default ILcdCurve implementations provided by LuciadLightspeed.

      Custom implementations can define their own constants, and use them to interpret the interpolation of the curve.

      Specified by:
      getInterpolation in interface ILcdCircleBy3Points
      Specified by:
      getInterpolation in interface ILcdCircularArc
      Specified by:
      getInterpolation in interface ILcdCircularArcBy3Points
      Specified by:
      getInterpolation in interface ILcdCompositeCurve
      Specified by:
      getInterpolation in interface ILcdCurve
      Overrides:
      getInterpolation in class TLcdGML32Arc
      Returns:
      the interpolation method used by this curve.
    • getLineSegmentIntersectionCount

      public int getLineSegmentIntersectionCount(ILcdPoint aP1, ILcdPoint aP2)
      Description copied from interface: ILcdCurve
      Returns the number of intersections between this curve and a line segment defined by the two specified points.

      This information can be used to perform containment calculations, if this curve is closed or if this curve is part of a composite closed curve. By determining the number of intersections between this curve and a line segment starting from a given point in a fixed direction, one can determine whether a point is located within the closed curve by using the even-odd rule.

      Specified by:
      getLineSegmentIntersectionCount in interface ILcdCurve
      Overrides:
      getLineSegmentIntersectionCount in class TLcdGML32Arc
      Parameters:
      aP1 - the first point of the line segment
      aP2 - the second point of the line segment
      Returns:
      the number of intersections between the curve and the line segment
    • move2D

      public void move2D(ILcdPoint aPoint)
      Description copied from interface: ILcd2DEditableShape
      Moves this ILcd2DEditableShape to the given point in the 2D space. The focus point is used as the handle by which the shape is moved. Only the first two dimensions of the ILcdShape and the ILcdPoint are considered. The third dimension is left unchanged.
      Specified by:
      move2D in interface ILcd2DEditableShape
      Overrides:
      move2D in class TLcdGML32Arc
      Parameters:
      aPoint - the ILcdPoint to move to.
      See Also:
    • move2D

      public void move2D(double aX, double aY)
      Description copied from interface: ILcd2DEditableShape
      Moves this ILcd2DEditableShape to the given point in the 2D space. The focus point is used as the handle by which the shape is moved. Only the first two dimensions of the ILcdShape are considered. The third dimension is left unchanged.
      Specified by:
      move2D in interface ILcd2DEditableShape
      Overrides:
      move2D in class TLcdGML32Arc
      Parameters:
      aX - the x coordinate of the point.
      aY - the y coordinate of the point.
    • translate2D

      public void translate2D(double aDeltaX, double aDeltaY)
      Description copied from interface: ILcd2DEditableShape
      Translates this ILcd2DEditableShape from its current position over the given translation vector in the 2D space. Only the first two dimensions of the ILcdShape are considered. The third dimension is left unchanged.
      Specified by:
      translate2D in interface ILcd2DEditableShape
      Overrides:
      translate2D in class TLcdGML32Arc
      Parameters:
      aDeltaX - the x coordinate of the translation vector.
      aDeltaY - the y coordinate of the translation vector.
    • getFocusPoint

      public ILcdPoint getFocusPoint()
      Description copied from interface: ILcdShape
      Returns the focus point of this ILcdShape.
      Specified by:
      getFocusPoint in interface ILcdShape
      Overrides:
      getFocusPoint in class TLcdGML32Arc
      Returns:
      the focus point of this ILcdShape.
    • contains2D

      public boolean contains2D(ILcdPoint aPoint)
      Description copied from interface: ILcdShape
      Checks whether this ILcdShape contains the given ILcdPoint in the 2D space. Only the first two dimensions of the ILcdShape and the ILcdPoint are considered.
      Specified by:
      contains2D in interface ILcdShape
      Overrides:
      contains2D in class TLcdGML32Arc
      Parameters:
      aPoint - the ILcdPoint to test.
      Returns:
      the boolean result of the containment test.
      See Also:
    • contains2D

      public boolean contains2D(double aX, double aY)
      Description copied from interface: ILcdShape
      Checks whether this ILcdShape contains the given point in the 2D space. Only the first two dimensions of the ILcdShape are considered.
      Specified by:
      contains2D in interface ILcdShape
      Overrides:
      contains2D in class TLcdGML32Arc
      Parameters:
      aX - the x coordinate of the point.
      aY - the y coordinate of the point.
      Returns:
      the boolean result of the containment test.
    • contains3D

      public boolean contains3D(ILcdPoint aPoint)
      Description copied from interface: ILcdShape
      Checks whether this ILcdShape contains the given ILcdPoint in the 3D space.
      Specified by:
      contains3D in interface ILcdShape
      Overrides:
      contains3D in class TLcdGML32Arc
      Parameters:
      aPoint - the ILcdPoint to test.
      Returns:
      the boolean result of the containment test.
      See Also:
    • contains3D

      public boolean contains3D(double aX, double aY, double aZ)
      Description copied from interface: ILcdShape
      Checks whether this ILcdShape contains the given point in the 3D space.
      Specified by:
      contains3D in interface ILcdShape
      Overrides:
      contains3D in class TLcdGML32Arc
      Parameters:
      aX - the x coordinate of the point.
      aY - the y coordinate of the point.
      aZ - the z coordinate of the point.
      Returns:
      the boolean result of the containment test.
    • getBounds

      public ILcdBounds getBounds()
      Description copied from interface: ILcdBounded
      Returns the ILcdBounds by which the geometry of this ILcdBounded object is bounded.

      If the geometry does not allow retrieving valid bounds (for example a polyline with 0 points) the return value is unspecified. It is highly recommended to return an undefined bounds. You can create undefined bounds using the default constructors of TLcdLonLatBounds or TLcdXYBounds.

      Specified by:
      getBounds in interface ILcdBounded
      Overrides:
      getBounds in class TLcdGML32Arc
      Returns:
      the ILcdBounds by which the geometry of this ILcdBounded object is bounded.
    • clone

      public TLcdGML32Circle clone()
      Description copied from class: TLcdDataObject
      Returns a deep clone of this object. This method delegates to TLcdDataObject.clone(Map).
      Specified by:
      clone in interface ILcdCloneable
      Overrides:
      clone in class TLcdGML32ArcString
      Returns:
      a deep clone of this object
      See Also:
    • clone

      public TLcdDataObject clone(Map aObjectDictionary)
      Description copied from class: TLcdDataObject
      Returns a deep clone of this object. If the clone is not already present in the dictionary, a new instance if created as follows:
      • First, a new instance is created using Java's clone() mechanism.
      • Then, all properties of this object are cloned and set on the newly created instance. A property is cloned as follows:
        • If the property value is an ILcdDataObject, the value is cloned by first creating a new instance via the value.getDataType().newInstance() method, and then cloning its properties one by one.
        • If the value implements ILcdDeepCloneable or ILcdCloneable then this interface is used to clone the value.
        • Otherwise, the property value is copied by reference.
      Specified by:
      clone in interface ILcdDeepCloneable
      Overrides:
      clone in class TLcdGML32ArcString
      Parameters:
      aObjectDictionary - the Object dictionary that keeps track of the objects for which a clone has already been made, and their corresponding clone Object.
      Returns:
      a deep clone of this object
    • getInterpolationAttr

      public ELcdGML32CurveInterpolation getInterpolationAttr()
      Returns the value of the property that maps to the interpolation attribute.
      Returns:
      the value of the INTERPOLATION_ATTR_PROPERTY property.
    • setInterpolationAttr

      public void setInterpolationAttr(ELcdGML32CurveInterpolation aValue)
      Sets the value of the property that maps to the interpolation attribute.
      Parameters:
      aValue - the value to set for the INTERPOLATION_ATTR_PROPERTY property.
    • getNumArc

      public Long getNumArc()
      Returns the value of the property that maps to the numArc attribute.
      Returns:
      the value of the NUM_ARC_PROPERTY property.
    • setNumArc

      public void setNumArc(Long aValue)
      Sets the value of the property that maps to the numArc attribute.
      Parameters:
      aValue - the value to set for the NUM_ARC_PROPERTY property.
    • getPosGroup

      public Object getPosGroup()
      Returns the value of the property that maps to the choice between the pos and pointProperty and pointRep and posList and coordinates elements.

      The possible values for this property are instances of

      Returns:
      the value of the POS_GROUP_PROPERTY property.
    • setPosGroup

      public void setPosGroup(Object aValue)
      Sets the value of the property that maps to the choice between the pos and pointProperty and pointRep and posList and coordinates elements.

      The possible values for this property are instances of

      Parameters:
      aValue - the value to set for the POS_GROUP_PROPERTY property.
    • getNumDerivativeInterior

      public long getNumDerivativeInterior()
      Returns the value of the property that maps to the numDerivativeInterior attribute.
      Returns:
      the value of the NUM_DERIVATIVE_INTERIOR_PROPERTY property.
    • setNumDerivativeInterior

      public void setNumDerivativeInterior(long aValue)
      Sets the value of the property that maps to the numDerivativeInterior attribute.
      Parameters:
      aValue - the value to set for the NUM_DERIVATIVE_INTERIOR_PROPERTY property.
    • getNumDerivativesAtEnd

      public long getNumDerivativesAtEnd()
      Returns the value of the property that maps to the numDerivativesAtEnd attribute.
      Returns:
      the value of the NUM_DERIVATIVES_AT_END_PROPERTY property.
    • setNumDerivativesAtEnd

      public void setNumDerivativesAtEnd(long aValue)
      Sets the value of the property that maps to the numDerivativesAtEnd attribute.
      Parameters:
      aValue - the value to set for the NUM_DERIVATIVES_AT_END_PROPERTY property.
    • getNumDerivativesAtStart

      public long getNumDerivativesAtStart()
      Returns the value of the property that maps to the numDerivativesAtStart attribute.
      Returns:
      the value of the NUM_DERIVATIVES_AT_START_PROPERTY property.
    • setNumDerivativesAtStart

      public void setNumDerivativesAtStart(long aValue)
      Sets the value of the property that maps to the numDerivativesAtStart attribute.
      Parameters:
      aValue - the value to set for the NUM_DERIVATIVES_AT_START_PROPERTY property.