public class TLcdGML32ArcByBulge extends TLcdGML32ArcStringByBulge implements ILcd2DEditableCircularArcByBulge
Modifier and Type | Field and Description |
---|---|
static TLcdDataProperty |
BULGE_GML_PROPERTY
Data property that maps to the
bulge element. |
static TLcdDataProperty |
INTERPOLATION_ATTR_PROPERTY
Data property that maps to the
interpolation attribute. |
static TLcdDataProperty |
NORMAL_PROPERTY
Data property that maps to the
normal element. |
static TLcdDataProperty |
NUM_ARC_PROPERTY
Data property that maps to the
numArc attribute. |
static TLcdDataProperty |
NUM_DERIVATIVE_INTERIOR_PROPERTY
Data property that maps to the
numDerivativeInterior attribute. |
static TLcdDataProperty |
NUM_DERIVATIVES_AT_END_PROPERTY
Data property that maps to the
numDerivativesAtEnd attribute. |
static TLcdDataProperty |
NUM_DERIVATIVES_AT_START_PROPERTY
Data property that maps to the
numDerivativesAtStart attribute. |
static TLcdDataProperty |
POS_GROUP_PROPERTY
Data property that maps to the choice between the
pos and pointProperty and pointRep and posList and coordinates elements. |
INTERPOLATION_CIRCLE_BY_3POINTS, INTERPOLATION_CIRCLE_BY_CENTERPOINT, INTERPOLATION_CIRCULARARC_BY_3POINTS, INTERPOLATION_CIRCULARARC_BY_BULGE, INTERPOLATION_CIRCULARARC_BY_CENTERPOINT, INTERPOLATION_ELLIPTICAL, INTERPOLATION_GEODESIC, INTERPOLATION_LINEAR, INTERPOLATION_MIXED, INTERPOLATION_RHUMB
Constructor and Description |
---|
TLcdGML32ArcByBulge() |
TLcdGML32ArcByBulge(double aStartX,
double aStartY,
double aEndX,
double aEndY,
double aBulge,
ILcdModelReference aModelReference)
Creates a new circular arc using the given point coordinates, bulge factor and model reference.
|
TLcdGML32ArcByBulge(ILcdModelReference aModelReference)
Creates a new instance and initializes its posGroup with a direct
position list initialized with the given model reference.
|
TLcdGML32ArcByBulge(TLcdDataType aType) |
TLcdGML32ArcByBulge(TLcdDataType aDataType,
ILcdModelReference aModelReference)
Creates a new instance and initializes its posGroup with a direct
position list initialized with the given model reference.
|
Modifier and Type | Method and Description |
---|---|
void |
computePointSFCT(double aParam,
ILcd3DEditablePoint aPointSFCT)
Computes a point of the curve, defined by the given parameter.
|
boolean |
contains2D(double aX,
double aY)
Checks whether this
ILcdShape contains the given point in
the 2D space. |
boolean |
contains2D(ILcdPoint aPoint)
Checks whether this
ILcdShape contains the given ILcdPoint in the 2D space. |
boolean |
contains3D(double aX,
double aY,
double aZ)
Checks whether this
ILcdShape contains the given point in
the 3D space. |
boolean |
contains3D(ILcdPoint aPoint)
Checks whether this
ILcdShape contains the given ILcdPoint in the 3D space. |
double |
getArcAngle()
Returns the angle over which this
ILcdCircularArc extends (in degrees). |
ILcdBounds |
getBounds()
Returns the
ILcdBounds by which the geometry of this ILcdBounded object
is bounded. |
double |
getBulge()
Returns the bulge factor of this arc.
|
ILcdDoubleList |
getBulgeGML()
Returns the value of the property that maps to the
bulge element. |
ILcdPoint |
getCenter()
Returns the center of this
ILcdCircularArc . |
ILcdPoint |
getEndPoint()
Retrieves the end point of the curve.
|
double |
getEndTangent2D()
Returns the angle of the curve's tangent at the end point,
in degrees counterclockwise from the direction at 3 o'clock.
|
ILcdPoint |
getFocusPoint()
Returns the focus point of this
ILcdShape . |
String |
getInterpolation()
Returns the interpolation method used by this curve.
|
ELcdGML32CurveInterpolation |
getInterpolationAttr()
Returns the value of the property that maps to the
interpolation attribute. |
double |
getLength2D(double aParam1,
double aParam2)
Returns the length between two points of the curve,
defined by the given parameters.
|
int |
getLineSegmentIntersectionCount(ILcdPoint aP1,
ILcdPoint aP2)
Returns the number of intersections between this curve and a line segment
defined by the two specified points.
|
List<TLcdGML32Vector> |
getNormal()
Returns the value of the property that maps to the
normal element. |
Long |
getNumArc()
Returns the value of the property that maps to the
numArc attribute. |
long |
getNumDerivativeInterior()
Returns the value of the property that maps to the
numDerivativeInterior attribute. |
long |
getNumDerivativesAtEnd()
Returns the value of the property that maps to the
numDerivativesAtEnd attribute. |
long |
getNumDerivativesAtStart()
Returns the value of the property that maps to the
numDerivativesAtStart attribute. |
protected int |
getPointCount() |
Object |
getPosGroup()
Returns the value of the property that maps to the choice between the
pos and pointProperty and pointRep and posList and coordinates elements. |
double |
getRadius()
Returns the radius of this
ILcdCircularArc . |
double |
getStartAngle()
Returns the start angle of this
ILcdCircularArc (in degrees). |
ILcdPoint |
getStartPoint()
Retrieves the start point of the curve.
|
double |
getStartTangent2D()
Returns the angle of the curve's tangent at the start point,
in degrees counterclockwise from the direction at 3 o'clock.
|
double |
getTangent2D(double aParam)
Returns the angle of the curve's tangent in the point defined
by the given parameter, in degrees counterclockwise from the
direction at 3 o'clock.
|
void |
move2D(double aX,
double aY)
Moves this
ILcd2DEditableShape to the given point in the 2D space. |
void |
move2D(ILcdPoint aPoint)
Moves this
ILcd2DEditableShape to the given point in the 2D space. |
void |
moveEndPoint2D(double aX,
double aY)
Moves the end point to the given point in the 2D space.
|
void |
moveStartPoint2D(double aX,
double aY)
Moves the start point to the given point in the 2D space.
|
void |
setBulge(double aBulge)
Sets the bulge factor to the given value.
|
void |
setInterpolationAttr(ELcdGML32CurveInterpolation aValue)
Sets the value of the property that maps to the
interpolation attribute. |
void |
setNumArc(Long aValue)
Sets the value of the property that maps to the
numArc attribute. |
void |
setNumDerivativeInterior(long aValue)
Sets the value of the property that maps to the
numDerivativeInterior attribute. |
void |
setNumDerivativesAtEnd(long aValue)
Sets the value of the property that maps to the
numDerivativesAtEnd attribute. |
void |
setNumDerivativesAtStart(long aValue)
Sets the value of the property that maps to the
numDerivativesAtStart attribute. |
void |
setPosGroup(Object aValue)
Sets the value of the property that maps to the choice between the
pos and pointProperty and pointRep and posList and coordinates elements. |
void |
translate2D(double aDeltaX,
double aDeltaY)
Translates this
ILcd2DEditableShape from its current position over the given translation
vector in the 2D space. |
void |
translateEndPoint2D(double aDeltaX,
double aDeltaY)
Translates the end point from its current position over the given translation vector in the 2D
space.
|
void |
translateStartPoint2D(double aDeltaX,
double aDeltaY)
Translates the start point from its current position over the given translation vector in the
2D space.
|
clone, clone, getCurves
getDataType, getValue, getValue, hasValue, hasValue, setValue, setValue, toString
equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait
clone
public static final TLcdDataProperty INTERPOLATION_ATTR_PROPERTY
interpolation
attribute.
The possible values for this property are instances of ELcdGML32CurveInterpolation
.public static final TLcdDataProperty NUM_ARC_PROPERTY
numArc
attribute.
The possible values for this property are instances of Long
.public static final TLcdDataProperty POS_GROUP_PROPERTY
pos
and pointProperty
and pointRep
and posList
and coordinates
elements.
The possible values for this property are instances of
List<TLcdGML32DirectPosition>
List<TLcdGML32PointProperty>
List<TLcdGML32PointProperty>
TLcdGML32DirectPositionList
TLcdGML32Coordinates
public static final TLcdDataProperty BULGE_GML_PROPERTY
bulge
element.
The possible values for this property are instances of ILcdDoubleList
.public static final TLcdDataProperty NORMAL_PROPERTY
normal
element.
The possible values for this property are instances of List<TLcdGML32Vector>
.public static final TLcdDataProperty NUM_DERIVATIVE_INTERIOR_PROPERTY
numDerivativeInterior
attribute.
The possible values for this property are instances of long
.public static final TLcdDataProperty NUM_DERIVATIVES_AT_END_PROPERTY
numDerivativesAtEnd
attribute.
The possible values for this property are instances of long
.public static final TLcdDataProperty NUM_DERIVATIVES_AT_START_PROPERTY
numDerivativesAtStart
attribute.
The possible values for this property are instances of long
.public TLcdGML32ArcByBulge()
public TLcdGML32ArcByBulge(TLcdDataType aType)
public TLcdGML32ArcByBulge(ILcdModelReference aModelReference)
aModelReference
- the model reference for this arcpublic TLcdGML32ArcByBulge(double aStartX, double aStartY, double aEndX, double aEndY, double aBulge, ILcdModelReference aModelReference)
aStartX
- the X-coordinate of the arc's start point.aStartY
- the Y-coordinate of the arc's start point.aEndX
- the X-coordinate of the arc's end point.aEndY
- the Y-coordinate of the arc's end point.aBulge
- the bulge factor of the arc.aModelReference
- the model referencepublic TLcdGML32ArcByBulge(TLcdDataType aDataType, ILcdModelReference aModelReference)
aDataType
- the data type for this arcaModelReference
- the model reference for this arcpublic void setBulge(double aBulge)
ILcd2DEditableCircularArcByBulge
setBulge
in interface ILcd2DEditableCircularArcByBulge
aBulge
- the bulge factor.ILcdCircularArcByBulge.getBulge()
public void moveStartPoint2D(double aX, double aY)
ILcd2DEditableCircularArcByBulge
ILcdShape
are considered. The third dimension is left unchanged.moveStartPoint2D
in interface ILcd2DEditableCircularArcByBulge
aX
- the x coordinate of the point.aY
- the y coordinate of the point.public void moveEndPoint2D(double aX, double aY)
ILcd2DEditableCircularArcByBulge
ILcdShape
are considered. The third dimension is left unchanged.moveEndPoint2D
in interface ILcd2DEditableCircularArcByBulge
aX
- the x coordinate of the point.aY
- the y coordinate of the point.public void translateStartPoint2D(double aDeltaX, double aDeltaY)
ILcd2DEditableCircularArcByBulge
translateStartPoint2D
in interface ILcd2DEditableCircularArcByBulge
aDeltaX
- the x coordinate of the translation vector.aDeltaY
- the y coordinate of the translation vector.public void translateEndPoint2D(double aDeltaX, double aDeltaY)
ILcd2DEditableCircularArcByBulge
translateEndPoint2D
in interface ILcd2DEditableCircularArcByBulge
aDeltaX
- the x coordinate of the translation vector.aDeltaY
- the y coordinate of the translation vector.public double getBulge()
ILcdCircularArcByBulge
getBulge
in interface ILcdCircularArcByBulge
public ILcdPoint getCenter()
ILcdCircularArc
ILcdCircularArc
.getCenter
in interface ILcdCircularArc
ILcdCircularArc
.public double getRadius()
ILcdCircularArc
ILcdCircularArc
.getRadius
in interface ILcdCircularArc
ILcdCircularArc
.public double getStartAngle()
ILcdCircularArc
ILcdCircularArc
(in degrees). The angle is
measured from 3 o'clock position, positive counter-clockwise.getStartAngle
in interface ILcdCircularArc
public double getArcAngle()
ILcdCircularArc
ILcdCircularArc
extends (in degrees). The angle
is positive counter-clockwise.getArcAngle
in interface ILcdCircularArc
public ILcdPoint getStartPoint()
ILcdCurve
This is equivalent to computePointSFCT(0)
.
getStartPoint
in interface ILcdCompositeCurve
getStartPoint
in interface ILcdCurve
getStartPoint
in class TLcdGML32ArcStringByBulge
public ILcdPoint getEndPoint()
ILcdCurve
This is equivalent to computePointSFCT(1)
.
getEndPoint
in interface ILcdCompositeCurve
getEndPoint
in interface ILcdCurve
getEndPoint
in class TLcdGML32ArcStringByBulge
public double getStartTangent2D()
ILcdCurve
The tangent orientation is from the start point towards the rest of the shape.
This is the same as getTangent2D(0)
.
getStartTangent2D
in interface ILcdCurve
getStartTangent2D
in class TLcdGML32ArcStringByBulge
public double getEndTangent2D()
ILcdCurve
The tangent orientation is from the end point, away from the curve before it.
This is the same as getTangent2D(1)
.
getEndTangent2D
in interface ILcdCurve
getEndTangent2D
in class TLcdGML32ArcStringByBulge
public double getTangent2D(double aParam)
ILcdCurve
The tangent orientation is from the point at parameter aParam
towards the rest of the shape.
ILcdCurve.getStartTangent2D()
.ILcdCurve.getEndTangent2D()
.getTangent2D
in interface ILcdCurve
getTangent2D
in class TLcdGML32ArcStringByBulge
aParam
- a value of the closed interval [0,1]public double getLength2D(double aParam1, double aParam2)
ILcdCurve
aParam1 == aParam2
, the length is 0.aParam1 == 0 and aParam2 == 1
, the length is the whole length of the curve.aParam1 > aParam2
, the length is (aParam1 to 1
) + (0 to aParam2
).getLength2D
in interface ILcdCurve
getLength2D
in class TLcdGML32ArcStringByBulge
aParam1
- a value of the closed interval [0,1]aParam2
- a value of the closed interval [0,1]public void computePointSFCT(double aParam, ILcd3DEditablePoint aPointSFCT)
ILcdCurve
ILcdCurve.getStartPoint()
.ILcdCurve.getEndPoint()
.computePointSFCT
in interface ILcdCurve
computePointSFCT
in class TLcdGML32ArcStringByBulge
aParam
- a value of the closed interval [0,1]aPointSFCT
- the point to store the computed curve point inpublic String getInterpolation()
ILcdCurve
A set of predefined constants are defined in this interface,
which are used by the default ILcdCurve
implementations
provided by LuciadLightspeed.
Custom implementations can define their own constants, and use them to interpret the interpolation of the curve.
getInterpolation
in interface ILcdCircularArc
getInterpolation
in interface ILcdCircularArcByBulge
getInterpolation
in interface ILcdCompositeCurve
getInterpolation
in interface ILcdCurve
getInterpolation
in class TLcdGML32ArcStringByBulge
public int getLineSegmentIntersectionCount(ILcdPoint aP1, ILcdPoint aP2)
ILcdCurve
This information can be used to perform containment calculations, if this curve is closed or if this curve is part of a composite closed curve. By determining the number of intersections between this curve and a line segment starting from a given point in a fixed direction, one can determine whether a point is located within the closed curve by using the even-odd rule.
getLineSegmentIntersectionCount
in interface ILcdCurve
getLineSegmentIntersectionCount
in class TLcdGML32ArcStringByBulge
aP1
- the first point of the line segmentaP2
- the second point of the line segmentpublic void move2D(ILcdPoint aPoint)
ILcd2DEditableShape
ILcd2DEditableShape
to the given point in the 2D space. The focus point
is used as the handle by which the shape is moved. Only the first
two dimensions of the ILcdShape
and the ILcdPoint
are considered.
The third dimension is left unchanged.move2D
in interface ILcd2DEditableShape
aPoint
- the ILcdPoint
to move to.ILcd2DEditableShape.move2D(double, double)
public void move2D(double aX, double aY)
ILcd2DEditableShape
ILcd2DEditableShape
to the given point in the 2D space. The focus point
is used as the handle by which the shape is moved. Only the first
two dimensions of the ILcdShape
are considered.
The third dimension is left unchanged.move2D
in interface ILcd2DEditableShape
aX
- the x coordinate of the point.aY
- the y coordinate of the point.public void translate2D(double aDeltaX, double aDeltaY)
ILcd2DEditableShape
ILcd2DEditableShape
from its current position over the given translation
vector in the 2D space. Only the first two dimensions of the ILcdShape
are considered.
The third dimension is left unchanged.translate2D
in interface ILcd2DEditableShape
aDeltaX
- the x coordinate of the translation vector.aDeltaY
- the y coordinate of the translation vector.public ILcdPoint getFocusPoint()
ILcdShape
ILcdShape
.getFocusPoint
in interface ILcdShape
getFocusPoint
in class TLcdGML32ArcStringByBulge
ILcdShape
.public boolean contains2D(ILcdPoint aPoint)
ILcdShape
ILcdShape
contains the given ILcdPoint
in the 2D space.
Only the first two dimensions of the ILcdShape
and the ILcdPoint
are considered.contains2D
in interface ILcdShape
contains2D
in class TLcdGML32ArcStringByBulge
aPoint
- the ILcdPoint
to test.ILcdShape.contains2D(double, double)
public boolean contains2D(double aX, double aY)
ILcdShape
ILcdShape
contains the given point in
the 2D space. Only the first two dimensions of the ILcdShape
are considered.contains2D
in interface ILcdShape
contains2D
in class TLcdGML32ArcStringByBulge
aX
- the x coordinate of the point.aY
- the y coordinate of the point.public boolean contains3D(ILcdPoint aPoint)
ILcdShape
ILcdShape
contains the given ILcdPoint
in the 3D space.contains3D
in interface ILcdShape
contains3D
in class TLcdGML32ArcStringByBulge
aPoint
- the ILcdPoint
to test.ILcdShape.contains3D(double, double, double)
public boolean contains3D(double aX, double aY, double aZ)
ILcdShape
ILcdShape
contains the given point in
the 3D space.contains3D
in interface ILcdShape
contains3D
in class TLcdGML32ArcStringByBulge
aX
- the x coordinate of the point.aY
- the y coordinate of the point.aZ
- the z coordinate of the point.public ILcdBounds getBounds()
ILcdBounded
ILcdBounds
by which the geometry of this ILcdBounded
object
is bounded.
If the geometry does not allow retrieving valid bounds (for example a polyline with 0 points)
the return value is unspecified.
It is highly recommended to return an undefined
bounds.
You can create undefined bounds using the default constructors
of TLcdLonLatBounds
or TLcdXYBounds
.
getBounds
in interface ILcdBounded
getBounds
in class TLcdGML32ArcStringByBulge
ILcdBounds
by which the geometry of this ILcdBounded
object
is bounded.protected int getPointCount()
public ELcdGML32CurveInterpolation getInterpolationAttr()
interpolation
attribute.INTERPOLATION_ATTR_PROPERTY
property.public void setInterpolationAttr(ELcdGML32CurveInterpolation aValue)
interpolation
attribute.aValue
- the value to set for the INTERPOLATION_ATTR_PROPERTY
property.public Long getNumArc()
numArc
attribute.NUM_ARC_PROPERTY
property.public void setNumArc(Long aValue)
numArc
attribute.aValue
- the value to set for the NUM_ARC_PROPERTY
property.public Object getPosGroup()
pos
and pointProperty
and pointRep
and posList
and coordinates
elements.
The possible values for this property are instances of
List<TLcdGML32DirectPosition>
List<TLcdGML32PointProperty>
List<TLcdGML32PointProperty>
TLcdGML32DirectPositionList
TLcdGML32Coordinates
POS_GROUP_PROPERTY
property.public void setPosGroup(Object aValue)
pos
and pointProperty
and pointRep
and posList
and coordinates
elements.
The possible values for this property are instances of
List<TLcdGML32DirectPosition>
List<TLcdGML32PointProperty>
List<TLcdGML32PointProperty>
TLcdGML32DirectPositionList
TLcdGML32Coordinates
aValue
- the value to set for the POS_GROUP_PROPERTY
property.public ILcdDoubleList getBulgeGML()
bulge
element.BULGE_GML_PROPERTY
property.public List<TLcdGML32Vector> getNormal()
normal
element.NORMAL_PROPERTY
property.public long getNumDerivativeInterior()
numDerivativeInterior
attribute.NUM_DERIVATIVE_INTERIOR_PROPERTY
property.public void setNumDerivativeInterior(long aValue)
numDerivativeInterior
attribute.aValue
- the value to set for the NUM_DERIVATIVE_INTERIOR_PROPERTY
property.public long getNumDerivativesAtEnd()
numDerivativesAtEnd
attribute.NUM_DERIVATIVES_AT_END_PROPERTY
property.public void setNumDerivativesAtEnd(long aValue)
numDerivativesAtEnd
attribute.aValue
- the value to set for the NUM_DERIVATIVES_AT_END_PROPERTY
property.public long getNumDerivativesAtStart()
numDerivativesAtStart
attribute.NUM_DERIVATIVES_AT_START_PROPERTY
property.public void setNumDerivativesAtStart(long aValue)
numDerivativesAtStart
attribute.aValue
- the value to set for the NUM_DERIVATIVES_AT_START_PROPERTY
property.