LuciadLightspeed Release notes

• The parameter was not supported for WCS 1.1 POST requests.
• The parameter was not validated for WCS 1.0 GET and POST requests.

• Dimensions with an axis without a unit.
• Dimensions with strings as possible values.

Fixed a potential deadlock when modifying the ILcdCollection that is returned by ILspInteractivePaintableLayer#getObjectsWithPaintState, while holding a write lock on that collection. To fix this, ILcdCollection (and by extension ILcdList) now have additional methods that allow specifying an ILcdFireEventMode when performing modifications. By using the ILcdFireEventMode.FIRE_LATER event mode, collection change events are fired after the write lock has been released.

We recommend scanning your codebase for any custom usages of ILspInteractivePaintableLayer#getObjectsWithPaintState and making sure that any modifications to this collection happen within a write lock, while the change events are only fired after that write lock has been released. An example code snippet on how to do this can be found in the ILspInteractivePaintableLayer#getObjectsWithPaintState method javadoc.

• IG05/12 Intermediate Datum (EPSG:1144)
• World Geodetic System 1984 (G730) (EPSG:1152)
• World Geodetic System 1984 (Transit) (EPSG:1166)
• CR-SIRGAS (EPSG:1225)
• Sistem Referensi Geospasial Indonesia 2013 (EPSG:1293)
• International Terrestrial Reference Frame 1992 (EPSG:6651)

• The outline of the area is now drawn with a solid stroke instead of a dashed stroke
• The hostile indicator ("ENY") is now rendered in the outline stroke, when the symbol's affiliation is set to 'Hostile'

• Adds support for Revit 2025
• Fixes a decoding crash for some Revit files
• Contains several improvements to the generated Revit metadata

LuciadFusion and LuciadLightspeed users can now visualize ECW images with any number of bands and any bit depth.

TLspRadarVideoLayerBuilder now has the ability to work with radar feeds whose angular or radial resolution are variable over time. This requires the user to manually specify the resolution of the visualization, which is then effectively decoupled from that of the data. The new method displayResolution() on the layer builder is used to enable this behavior. If called, the radar video layer will be fully robust against all variations in the resolution of the incoming data.

Visualization of a Revit file in LuciadRIA, processed and served using LuciadFusion's OGC 3D Tiles service

Added support for the Autodesk Revit data format. Autodesk Revit is a BIM software tool for architects, engineers, and construction professionals to model shapes, structures, and systems in 3D.

For more details, see the Autodesk Revit entry in the Data Formats documentation section

The following new system properties let users configure reference decoder priority for the following model decoders:

• TLcdGeoTIFFModelDecoder : com.luciad.format.raster.TLcdGeoTIFFModelDecoder.referenceDecoderPriority
• TLcdLASModelDecoder : com.luciad.format.las.TLcdLASModelDecoder.referenceDecoderPriority
• TLcdE57ModelDecoder : com.luciad.format.e57.TLcdE57ModelDecoder.referenceDecoderPriority

The priority decides whether the model reference decoding is first attempted from the reference information embedded in the data file and then fall back to external reference source files such as WKT (.prj), REF (.ref) and EPSG (*.epsg) in case of an error or vice versa when the other reference decoder priority is selected.

For more information on how to configure the reference decoder priority for supported ILcdModelDecoder implementations, refer to the following article: Setting model reference decoder priority

A new style class, TLcdMilitarySymbolStyle, has been added to the Military Symbology API. This class can be used to define the symbol style of both APP-6 and MIL-STD-2525 symbols.

The usage is equivalent to the usage of the existing, standard specific style classes (TLcdDefaultAPP6AStyle and TLcdDefaultMS2525bStyle). You can configure a symbol dependent style, by either having your domain objects implement ILcdStyledMilitarySymbol or by defining a default style on your painter providers or layers.

The following methods have been added to configure a TLcdMilitarySymbolStyle on painter providers and layers:

• TLcdAPP6AGXYPainterProvider.setDefaultMilitarySymbolStyle
• TLcdAPP6AGXYLabelPainterProvider.setDefaultMilitarySymbolStyle
• TLspAPP6ALayerBuilder.defaultStyle
• TLspAPP6ASymbolStyle.Builder.militarySymbolStyle
• TLcdMS2525bGXYLabelProvider.setDefaultMilitarySymbolStyle
• TLcdMS2525bGXYLabelPainterProvider.setDefaultMilitarySymbolStyle
• TLspMS2525bLayerBuilder.defaultStyle
• TLspMS2525bSymbolStyle.Builder.militarySymbolStyle
• TLspMilitarySymbologyLayerBuilder.defaultStyle

• The colon ":" is no longer accepted in Windows file names.
• Spaces are no longer accepted in file URI's. They need to be escaped as described in the URI specification.

The default behavior of a number of model decoders has been changed. We now enable support for vertical datums by default for a number of model decoders. The vertical datum support will cause the appropriate geoid height to be applied to data files of the affected formats, if the data advertises a vertical datum. In previous versions, we ignored the vertical datum advertised by data by default.

Using the geoid will result in the use of more accurate elevation values, at the cost of performance when processing the data.

The following data formats are affected by this change:

1. DEM: TLcdDEMModelDecoder
2. DMED/DTED: TLcdDMEDModelDecoder, TLcdDTEDModelDecoder, TLcdDTEDDirectoryModelDecoder
3. ETOPO: TLcdETOPOModelDecoder
4. GeoTIFF: TLcdGeoTIFFModelDecoder
5. LAS/LAZ: TLcdLASModelDecoder
6. SwissDHM: TLcdSwissDHMMatrixModelDecoder

Because the default behavior has changed for these formats, your data may be painted at a different height, which can cause misalignment with your other layers. For example, you may apply the geoid to points in a LAS file, which causes your LAS points to be painted at a different elevation. If you combine this LAS data with an inaccurate terrain layer, there may be overlap between your LAS points and the terrain layer. You should check that your data is still properly aligned with your other layers after upgrading.

The recommended way to fix such alignment issues is to make sure you use an accurate terrain layer and use the same geoid on all your layers with elevation data. You should also verify that all your elevation data advertises the correct vertical datum. Read our article on Detecting and fixing vertical datum issues for more details.

If you have different behavior then before, and you are sure that the old behavior is preferred, you can revert to the old behavior in the following ways:

• Disable geoid support for a specific model decoder, by calling the method #setSupportGeoidDatums(boolean)
• Disable geoid support for all aforementioned model decoders, by setting the system property com.luciad.geodesy.geoidSupport.LEGACY to true.

The LuciadLightspeed and LuciadFusion APIs now use the Jakarta EE 10 API and Jakarta Servlet 6.0 API, where in previous releases the Java EE 7 API and Java Servlet 3.1 API were used. There are a few breaking changes in the new Jakarta Servlet 6.0 API, the main one being a rename of the javax.servlet package to jakarta.servlet. Any LuciadLightspeed or LuciadFusion API that use classes from this package thus contain a corresponding breaking change. The affected classes are mainly the classes implementing the OGC server standards (WM(T)S, WFS, etc). Any compilation errors you encounter related to this change can typically be resolved by performing a find and replace operation.

Refer to the documentation on hardware and software requirements in the prerequisites section for more information.

The class TLcdECWConfiguration is now removed from the API to keep the API clean and simple. If you were using this class, it is now required to use TLcdECWModelDecoder#getMaxCacheSize and TLcdECWModelDecoder#setMaxCacheSizeinstead of similar methods exposed by TLcdECWConfiguration.

The class TLcdECWImageDecoder is now removed from the API due to its limited capability in supporting decoding of multi band and multi bit depth ECW data files. If you were using this class, it is now required to use the enhanced TLcdECWModelDecoder, which fully supports decoding multi band and multi bit depth ECW data files. This updated decoder provides a more robust and versatile solution for handling ECW data.

The previous libecw-6.1.*.jar libraries are now replaced by ecw-6.1.0-native*.jar containing the native libraries provided as part of ERDAS ECW JP2 SDK 6.1.0. This change also adds the ecw-6.1.0.jar library which contains the JNI bindings to access the functionalities exposed by the packaged native libraries.

The geometry type of a number of APP-6A/B Minefield symbols has been changed. These symbols were modeled as polygons, which required the symbol to have at least 3 anchor points to define the symbol's shape. To better align these symbols with the NVG geometry bindings specification, the geometry has now been changed to a point, which requires only a single anchor point to define the symbol's shape. The following symbols are affected by this change:

• 2.X.2.2.1.6.1 "Planned Minefield"
• 2.X.2.2.1.6.2 "Completed Minefield"
• 2.X.2.2.1.6.5 "Antitank (AT) Minefield"
• 2.X.2.2.1.6.6 "Scatterable Mines"
• 2.X.2.2.1.6.7 "Antipersonnel (AP) Minefield Reinforced With Scatterable With Self-Destruct Date-Time-Group"
• 2.X.2.2.1.6.8 "Scatterable Minefield (Antitank Mines) With Self-Destruct Date-Time-Group"
• 2.X.2.2.1.7 "Executed Volcano Minefield"

The interfaces ILcdAPP6AStyle and ILcdMS2525bStyle, and their implementations TLcdDefaultAPP6AStyle and TLcdDefaultMS2525bStyle have been deprecated.

If you need to create a symbol style, you should use the newly introduced class TLcdMilitarySymbolStyle.

The discoverDataSources method of the TLcdBinzModelDecoder now returns a list containing two TLcdBIMDataSource objects: one for the geometry model, and one for the features model. Previously, it returned a list containing only a TLcdDataSource for the geometry model.

The following snippet can be used to get the geometry model for both the new and the previous version of this discoverDataSources method.

      TLcdBinzModelDecoder decoder = new TLcdBinzModelDecoder();
      List<? extends ILcdDataSource> dataSources = decoder.discoverDataSources("path/to/dataset.binz");
      ILcdModel geometryModel = decoder.decodeSource(dataSources.get(0));
    

The following deprecated DGN classes have been removed from the LuciadLightspeed API:

• TLcdDGNMicroStationServlet
• TLcdDGNMicroStationModelDecoder
• TLcdDGNMicroStationDisplayInfo
• TLcdDGNMicroStationLevelSymbology

Any usage of these classes should be replaced by the TLcdDGNModelDecoder.