Class TLcdXYPolygon

All Implemented Interfaces:
ILcdBounded, ILcdCurve, ILcdPointList, ILcdPointList2, ILcdPolygon, ILcdPolypoint, ILcdRing, ILcdShape, ILcd2DEditablePointList, ILcd2DEditablePolygon, ILcd2DEditablePolypoint, ILcd2DEditableShape, ILcdCache, ILcdCloneable, ILcdInvalidateable, Serializable, Cloneable
Direct Known Subclasses:
TLcdCGMPolygon, TLcdDGNShape2D, TLcdDWGFace3D, TLcdDWGPolyline2D, TLcdDWGSolid, TLcdMeasureXYPolygon, TLcdXYMPolygon

public class TLcdXYPolygon extends TLcdXYPolypoint implements ILcd2DEditablePolygon, ILcdRing
This class provides an implementation of ILcd2DEditablePolygon in the cartesian space.

This class is thread-safe for concurrent read-only access of its contents. For read-write access, external locking must be used. Such locking is typically done at the model level.

See Also:
  • Constructor Details Link icon

    • TLcdXYPolygon Link icon

      public TLcdXYPolygon()
    • TLcdXYPolygon Link icon

      public TLcdXYPolygon(ILcd2DEditablePointList a2DEditablePointList)
    • TLcdXYPolygon Link icon

      public TLcdXYPolygon(TLcdXYPolygon aPolygon, boolean aDeepCopy)
      Makes a clone of the point list that represents the polygon if it implements the interface ILcdCloneable and aDeepCopy is true. #see com.luciad.util.ILcdCloneable
  • Method Details Link icon

    • calculateOrientation Link icon

      protected void calculateOrientation()
    • getOrientation Link icon

      public final int getOrientation()
      Description copied from interface: ILcdPolygon
      Returns the orientation of this ILcdPolygon: ILcdPolygon.CLOCKWISE or ILcdPolygon.COUNTERCLOCKWISE.
      Specified by:
      getOrientation in interface ILcdPolygon
      Returns:
      the orientation of this ILcdPolygon: ILcdPolygon.CLOCKWISE or ILcdPolygon.COUNTERCLOCKWISE. This method should not return INVALID_ORIENTATION, which is only to be used for resetting the orientation so that it can be recalculated.
    • setOrientation Link icon

      public final void setOrientation(int aOrientation)
      Description copied from interface: ILcd2DEditablePolygon
      Sets the orientation of this ILcd2DEditablePolygon.
      Specified by:
      setOrientation in interface ILcd2DEditablePolygon
      Parameters:
      aOrientation - ILcd2DEditablePolygon.CLOCKWISE, ILcd2DEditablePolygon.COUNTERCLOCKWISE or ILcd2DEditablePolygon.INVALID_ORIENTATION.
    • contains2D Link icon

      public boolean contains2D(double aX, double aY)
      Determines whether this contains the given point. This method uses an even-odd insideness rule (also known as an alternating rule).
      Specified by:
      contains2D in interface ILcdShape
      Overrides:
      contains2D in class ALcd2DEditablePolypoint
      Parameters:
      aX - the X coordinate of the point to be tested.
      aY - the Y coordinate of the point to be tested.
      Returns:
      the boolean result of the containment test.
    • computePointSFCT Link icon

      public void computePointSFCT(double aParam, ILcd3DEditablePoint aPointSFCT)
      Description copied from interface: ILcdCurve
      Computes a point of the curve, defined by the given parameter.
      Specified by:
      computePointSFCT in interface ILcdCurve
      Parameters:
      aParam - a value of the closed interval [0,1]
      aPointSFCT - the point to store the computed curve point in
    • getEndPoint Link icon

      public ILcdPoint getEndPoint()
      Description copied from interface: ILcdCurve
      Retrieves the end point of the curve.

      This is equivalent to computePointSFCT(1).

      Specified by:
      getEndPoint in interface ILcdCurve
      Returns:
      the end point of the curve
    • getEndTangent2D Link icon

      public double getEndTangent2D()
      Description copied from interface: ILcdCurve
      Returns the angle of the curve's tangent at the end point, in degrees counterclockwise from the direction at 3 o'clock.

      The tangent orientation is from the end point, away from the curve before it.

      This is the same as getTangent2D(1).

      Specified by:
      getEndTangent2D in interface ILcdCurve
      Returns:
      the curve's angle in the end point
    • computePointAndNextIndexSFCT Link icon

      public int computePointAndNextIndexSFCT(double aParam, ILcd3DEditablePoint aPointSFCT)
    • getInterpolation Link icon

      public String getInterpolation()
      Description copied from interface: ILcdCurve
      Returns the interpolation method used by this curve.

      A set of predefined constants are defined in this interface, which are used by the default ILcdCurve implementations provided by LuciadLightspeed.

      Custom implementations can define their own constants, and use them to interpret the interpolation of the curve.

      Specified by:
      getInterpolation in interface ILcdCurve
      Returns:
      the interpolation method used by this curve.
    • getLength2D Link icon

      public double getLength2D(double aParam1, double aParam2)
      Description copied from interface: ILcdCurve
      Returns the length between two points of the curve, defined by the given parameters.
      • When aParam1 == aParam2, the length is 0.
      • When aParam1 == 0 and aParam2 == 1, the length is the whole length of the curve.
      • When aParam1 > aParam2, the length is (aParam1 to 1) + (0 to aParam2).
      Specified by:
      getLength2D in interface ILcdCurve
      Parameters:
      aParam1 - a value of the closed interval [0,1]
      aParam2 - a value of the closed interval [0,1]
      Returns:
      the length of the curve.
    • getLineSegmentIntersectionCount Link icon

      public int getLineSegmentIntersectionCount(ILcdPoint aP1, ILcdPoint aP2)
      Description copied from interface: ILcdCurve
      Returns the number of intersections between this curve and a line segment defined by the two specified points.

      This information can be used to perform containment calculations, if this curve is closed or if this curve is part of a composite closed curve. By determining the number of intersections between this curve and a line segment starting from a given point in a fixed direction, one can determine whether a point is located within the closed curve by using the even-odd rule.

      Specified by:
      getLineSegmentIntersectionCount in interface ILcdCurve
      Parameters:
      aP1 - the first point of the line segment
      aP2 - the second point of the line segment
      Returns:
      the number of intersections between the curve and the line segment
    • getStartPoint Link icon

      public ILcdPoint getStartPoint()
      Description copied from interface: ILcdCurve
      Retrieves the start point of the curve.

      This is equivalent to computePointSFCT(0).

      Specified by:
      getStartPoint in interface ILcdCurve
      Returns:
      the start point of the curve
    • getStartTangent2D Link icon

      public double getStartTangent2D()
      Description copied from interface: ILcdCurve
      Returns the angle of the curve's tangent at the start point, in degrees counterclockwise from the direction at 3 o'clock.

      The tangent orientation is from the start point towards the rest of the shape.

      This is the same as getTangent2D(0).

      Specified by:
      getStartTangent2D in interface ILcdCurve
      Returns:
      the curve's angle in the start point
    • getTangent2D Link icon

      public double getTangent2D(double aParam)
      Description copied from interface: ILcdCurve
      Returns the angle of the curve's tangent in the point defined by the given parameter, in degrees counterclockwise from the direction at 3 o'clock.

      The tangent orientation is from the point at parameter aParam towards the rest of the shape.

      Specified by:
      getTangent2D in interface ILcdCurve
      Parameters:
      aParam - a value of the closed interval [0,1]
      Returns:
      the curve's angle in the point defined by the given parameter
    • set2DEditablePointList Link icon

      public void set2DEditablePointList(ILcd2DEditablePointList a2DEditablePointList)
      Overrides:
      set2DEditablePointList in class ALcd2DEditablePolypoint
    • move2DPoint Link icon

      public void move2DPoint(int aIndex, double aX, double aY)
      Description copied from interface: ILcd2DEditablePointList
      Moves the specified point of this ILcd2DEditablePointList to the given point in the 2D space. Only the first two dimensions of the ILcdShape are considered. The third dimension is left unchanged.
      Specified by:
      move2DPoint in interface ILcd2DEditablePointList
      Overrides:
      move2DPoint in class ALcd2DEditablePolypoint
      Parameters:
      aIndex - a valid index in the list of points.
      aX - the x coordinate of the point.
      aY - the y coordinate of the point.
    • translate2DPoint Link icon

      public void translate2DPoint(int aIndex, double aDeltaX, double aDeltaY)
      Description copied from interface: ILcd2DEditablePointList
      Translates the specified point of this ILcd2DEditablePointList from its current position over the given translation vector in the 2D space. Only the first two dimensions of the points are considered. The third dimension is left unchanged.
      Specified by:
      translate2DPoint in interface ILcd2DEditablePointList
      Overrides:
      translate2DPoint in class ALcd2DEditablePolypoint
      Parameters:
      aDeltaX - the x coordinate of the translation vector.
      aDeltaY - the y coordinate of the translation vector.
    • insert2DPoint Link icon

      public void insert2DPoint(int aIndex, double aX, double aY)
      Description copied from interface: ILcd2DEditablePointList
      Inserts a point at the given index into this ILcd2DEditablePointList.
      Specified by:
      insert2DPoint in interface ILcd2DEditablePointList
      Overrides:
      insert2DPoint in class ALcd2DEditablePolypoint
      Parameters:
      aIndex - a valid new index in the list of points.
      aX - the x coordinate of the new point.
      aY - the y coordinate of the new point.
    • removePointAt Link icon

      public void removePointAt(int aIndex)
      Description copied from interface: ILcd2DEditablePointList
      Removes the point at the given index from this ILcd2DEditablePointList.
      Specified by:
      removePointAt in interface ILcd2DEditablePointList
      Overrides:
      removePointAt in class ALcd2DEditablePolypoint
      Parameters:
      aIndex - a valid index in the list of ILcdPoint objects.
    • clone Link icon

      public Object clone()
      Creates and returns a copy of this object.

      The contained editable points list is cloned. If cloning is not possible, a warning is sent to the log and a shallow copy is returned.

      The cache, the bounds and the focus point are not copied or cloned at all, but recalculated when needed.

      Specified by:
      clone in interface ILcdCloneable
      Overrides:
      clone in class TLcdXYPolypoint
      See Also: