Package com.luciad.shape.shape2D

Class TLcdXYCircularArcByCenterPoint

java.lang.Object
com.luciad.shape.ALcdShape
com.luciad.shape.shape2D.ALcd2DEditableShape
com.luciad.shape.shape2D.TLcdXYCircularArcByCenterPoint
All Implemented Interfaces:
ILcdBounded, ILcdCircularArc, ILcdCircularArcByCenterPoint, ILcdCurve, ILcdShape, ILcd2DEditableCircularArcByCenterPoint, ILcd2DEditableShape, ILcdCache, ILcdCloneable, Serializable, Cloneable
public class TLcdXYCircularArcByCenterPoint extends ALcd2DEditableShape implements ILcd2DEditableCircularArcByCenterPoint, ILcdCache
This class provides an implementation of ILcd2DEditableCircularArcByCenterPoint in the cartesian space.

This class is thread-safe for concurrent read-only access of its contents. For read-write access, external locking must be used. Such locking is typically done at the model level.

Since:
9.0
See Also:

  • Constructor Details

    • TLcdXYCircularArcByCenterPoint

      public TLcdXYCircularArcByCenterPoint()
      Creates a new TLcdXYCircularArcByCenterPoint with all parameters set to 0.

    • TLcdXYCircularArcByCenterPoint

      public TLcdXYCircularArcByCenterPoint(ILcd2DEditablePoint aCenter, double aRadius, double aStartAngle, double aArcAngle)
      Creates a new TLcdXYCircularArcByCenterPoint with the specified parameters.
      Parameters:
      aCenter - the center of the arc.
      aRadius - the radius of the circle.
      aStartAngle - the start angle (in degrees, measured from 3 o'clock position, positive counter-clockwise).
      aArcAngle - the arc angle (in degrees, positive counter-clockwise).
      Throws:
      IllegalArgumentException - if the length of the semi-major axis or the semi-minor axis of the ellipse on which this arc resides is negative.

    • TLcdXYCircularArcByCenterPoint

      public TLcdXYCircularArcByCenterPoint(double aCenterX, double aCenterY, double aRadius, double aStartAngle, double aArcAngle)
      Creates a new TLcdXYCircularArcByCenterPoint with the specified parameters.
      Parameters:
      aCenterX - the x coordinate of the center.
      aCenterY - the y coordinate of the center.
      aRadius - the radius of the circle.
      aStartAngle - the start angle (in degrees).
      aArcAngle - the sweep angle (in degrees).
      Throws:
      IllegalArgumentException - if the length of the semi-major axis or the semi-minor axis of the ellipse on which this arc resides is negative.

  • Method Details

    • getCenter

      public ILcdPoint getCenter()
      Description copied from interface: ILcdCircularArc
      Returns the center of this ILcdCircularArc.
      Specified by:
      getCenter in interface ILcdCircularArc
      Returns:
      the center of this ILcdCircularArc.

    • getRadius

      public double getRadius()
      Description copied from interface: ILcdCircularArc
      Returns the radius of this ILcdCircularArc.
      Specified by:
      getRadius in interface ILcdCircularArc
      Returns:
      the radius of this ILcdCircularArc.

    • setRadius

      public void setRadius(double aA)
      Description copied from interface: ILcd2DEditableCircularArcByCenterPoint
      Sets the circle's radius.
      Specified by:
      setRadius in interface ILcd2DEditableCircularArcByCenterPoint
      Parameters:
      aA - the new radius.

    • getStartAngle

      public double getStartAngle()
      Description copied from interface: ILcdCircularArc
      Returns the start angle of this ILcdCircularArc (in degrees). The angle is measured from 3 o'clock position, positive counter-clockwise.
      Specified by:
      getStartAngle in interface ILcdCircularArc
      Returns:
      the start angle of the arc (in degrees). The angle is measured from 3 o'clock position, positive counter-clockwise.

    • setStartAngle

      public void setStartAngle(double aStartAngle)
      Description copied from interface: ILcd2DEditableCircularArcByCenterPoint
      Sets the start angle of the arc (in degrees). The angle is measured from 3 o'clock position, positive counter-clockwise.
      Specified by:
      setStartAngle in interface ILcd2DEditableCircularArcByCenterPoint
      Parameters:
      aStartAngle - the new start angle.

    • getArcAngle

      public double getArcAngle()
      Description copied from interface: ILcdCircularArc
      Returns the angle over which this ILcdCircularArc extends (in degrees). The angle is positive counter-clockwise.
      Specified by:
      getArcAngle in interface ILcdCircularArc
      Returns:
      the angle over which the arc extends (in degrees). The angle is positive counter-clockwise.

    • setArcAngle

      public void setArcAngle(double aArcAngle)
      Description copied from interface: ILcd2DEditableCircularArcByCenterPoint
      Sets the angle over which the arc extends (in degrees). The angle is positive counter-clockwise.
      Specified by:
      setArcAngle in interface ILcd2DEditableCircularArcByCenterPoint
      Parameters:
      aArcAngle - the new arc angle.

    • getFocusPoint

      public ILcdPoint getFocusPoint()
      Description copied from interface: ILcdShape
      Returns the focus point of this ILcdShape.
      Specified by:
      getFocusPoint in interface ILcdShape
      Returns:
      the focus point of this ILcdShape.

    • getBounds

      public ILcdBounds getBounds()
      Description copied from interface: ILcdBounded
      Returns the ILcdBounds by which the geometry of this ILcdBounded object is bounded.

      If the geometry does not allow retrieving valid bounds (for example a polyline with 0 points) the return value is unspecified. It is highly recommended to return an undefined bounds. You can create undefined bounds using the default constructors of TLcdLonLatBounds or TLcdXYBounds.

      Specified by:
      getBounds in interface ILcdBounded
      Returns:
      the ILcdBounds by which the geometry of this ILcdBounded object is bounded.

    • contains2D

      public boolean contains2D(double aX, double aY)
      Description copied from interface: ILcdShape
      Checks whether this ILcdShape contains the given point in the 2D space. Only the first two dimensions of the ILcdShape are considered.
      Specified by:
      contains2D in interface ILcdShape
      Parameters:
      aX - the x coordinate of the point.
      aY - the y coordinate of the point.
      Returns:
      the boolean result of the containment test.

    • translate2D

      public void translate2D(double x, double y)
      Description copied from interface: ILcd2DEditableShape
      Translates this ILcd2DEditableShape from its current position over the given translation vector in the 2D space. Only the first two dimensions of the ILcdShape are considered. The third dimension is left unchanged.
      Specified by:
      translate2D in interface ILcd2DEditableShape
      Parameters:
      x - the x coordinate of the translation vector.
      y - the y coordinate of the translation vector.

    • getStartPoint

      public ILcdPoint getStartPoint()
      Description copied from interface: ILcdCurve
      Retrieves the start point of the curve.

      This is equivalent to computePointSFCT(0).

      Specified by:
      getStartPoint in interface ILcdCurve
      Returns:
      the start point of the curve

    • getEndPoint

      public ILcdPoint getEndPoint()
      Description copied from interface: ILcdCurve
      Retrieves the end point of the curve.

      This is equivalent to computePointSFCT(1).

      Specified by:
      getEndPoint in interface ILcdCurve
      Returns:
      the end point of the curve

    • getStartTangent2D

      public double getStartTangent2D()
      Description copied from interface: ILcdCurve
      Returns the angle of the curve's tangent at the start point, in degrees counterclockwise from the direction at 3 o'clock.

      The tangent orientation is from the start point towards the rest of the shape.

      This is the same as getTangent2D(0).

      Specified by:
      getStartTangent2D in interface ILcdCurve
      Returns:
      the curve's angle in the start point

    • getEndTangent2D

      public double getEndTangent2D()
      Description copied from interface: ILcdCurve
      Returns the angle of the curve's tangent at the end point, in degrees counterclockwise from the direction at 3 o'clock.

      The tangent orientation is from the end point, away from the curve before it.

      This is the same as getTangent2D(1).

      Specified by:
      getEndTangent2D in interface ILcdCurve
      Returns:
      the curve's angle in the end point

    • getTangent2D

      public double getTangent2D(double aParam)
      Description copied from interface: ILcdCurve
      Returns the angle of the curve's tangent in the point defined by the given parameter, in degrees counterclockwise from the direction at 3 o'clock.

      The tangent orientation is from the point at parameter aParam towards the rest of the shape.

      Specified by:
      getTangent2D in interface ILcdCurve
      Parameters:
      aParam - a value of the closed interval [0,1]
      Returns:
      the curve's angle in the point defined by the given parameter

    • getLength2D

      public double getLength2D(double aParam1, double aParam2)
      Description copied from interface: ILcdCurve
      Returns the length between two points of the curve, defined by the given parameters.
      • When aParam1 == aParam2, the length is 0.
      • When aParam1 == 0 and aParam2 == 1, the length is the whole length of the curve.
      • When aParam1 > aParam2, the length is (aParam1 to 1) + (0 to aParam2).
      Specified by:
      getLength2D in interface ILcdCurve
      Parameters:
      aParam1 - a value of the closed interval [0,1]
      aParam2 - a value of the closed interval [0,1]
      Returns:
      the length of the curve.

    • getInterpolation

      public String getInterpolation()
      Returns the interpolation method used by this curve, which is ILcdCurve.INTERPOLATION_CIRCULARARC_BY_CENTERPOINT.
      Specified by:
      getInterpolation in interface ILcdCircularArc
      Specified by:
      getInterpolation in interface ILcdCircularArcByCenterPoint
      Specified by:
      getInterpolation in interface ILcdCurve
      Returns:
      the interpolation method used by this curve, which is INTERPOLATION_CIRCULARARC_BY_CENTERPOINT.

    • computePointSFCT

      public void computePointSFCT(double aParam, ILcd3DEditablePoint aPointSFCT)
      Description copied from interface: ILcdCurve
      Computes a point of the curve, defined by the given parameter.
      Specified by:
      computePointSFCT in interface ILcdCurve
      Parameters:
      aParam - a value of the closed interval [0,1]
      aPointSFCT - the point to store the computed curve point in

    • insertIntoCache

      public void insertIntoCache(Object aKey, Object aObject)
      Description copied from interface: ILcdCache
      Inserts a cache Object corresponding to the given key Object.
      Specified by:
      insertIntoCache in interface ILcdCache
      Parameters:
      aKey - the key Object that will be used to identify the Object. The key must therefore be a unique identifier, typically the caller itself: insertIntoCache(this, ...).
      aObject - the Object to be cached.

    • getCachedObject

      public Object getCachedObject(Object aKey)
      Description copied from interface: ILcdCache
      Looks up and returns the cached Object corresponding to the given key.
      Specified by:
      getCachedObject in interface ILcdCache
      Parameters:
      aKey - the key Object that was used for storing the cache Object.
      Returns:
      the cached Object, or null if there is no Object corresponding to the given key.

    • removeCachedObject

      public Object removeCachedObject(Object aKey)
      Description copied from interface: ILcdCache
      Looks up and removes the cached Object corresponding to the given key.
      Specified by:
      removeCachedObject in interface ILcdCache
      Parameters:
      aKey - the key Object that was used for storing the cache Object.
      Returns:
      the cached Object, or null if there was no Object corresponding to the given key.

    • clearCache

      public void clearCache()
      Description copied from interface: ILcdCache
      Clears the cache.
      Specified by:
      clearCache in interface ILcdCache

    • clone

      public Object clone()
      Description copied from class: ALcdShape
      Creates and returns a copy of this object, by delegating to Object.clone(). Extensions should delegate to this implementation with super.clone(), in order to create an object instance of the right type, with all fields copied. They then should explicitly clone any non-primitive fields for which a deeper clone is required.
      Specified by:
      clone in interface ILcdCloneable
      Overrides:
      clone in class ALcdShape
      See Also:

    • equals

      public boolean equals(Object aObject)
      Returns whether the given object has the same class and the same coordinates and parameters.
      Overrides:
      equals in class ALcdShape

    • hashCode

      public int hashCode()
      Description copied from class: ALcdShape
      The hash code of this shape is the hash code of its class, in order to be consistent with the ALcdShape.equals(Object) method. Extensions should refine this implementation, based on their properties.
      Overrides:
      hashCode in class ALcdShape

    • toString

      public String toString()
      Overrides:
      toString in class Object

    • getLineSegmentIntersectionCount

      public int getLineSegmentIntersectionCount(ILcdPoint aP1, ILcdPoint aP2)
      Description copied from interface: ILcdCurve
      Returns the number of intersections between this curve and a line segment defined by the two specified points.

      This information can be used to perform containment calculations, if this curve is closed or if this curve is part of a composite closed curve. By determining the number of intersections between this curve and a line segment starting from a given point in a fixed direction, one can determine whether a point is located within the closed curve by using the even-odd rule.

      Specified by:
      getLineSegmentIntersectionCount in interface ILcdCurve
      Parameters:
      aP1 - the first point of the line segment
      aP2 - the second point of the line segment
      Returns:
      the number of intersections between the curve and the line segment