Package com.luciad.shape.shape2D

Class TLcdLonLatRhumbPolygon

java.lang.Object
com.luciad.shape.ALcdShape
com.luciad.shape.shape2D.ALcd2DEditableShape
com.luciad.shape.shape2D.ALcd2DEditablePolypoint
com.luciad.shape.shape2D.TLcdLonLatPolypoint
com.luciad.shape.shape2D.TLcdLonLatRhumbPolygon
All Implemented Interfaces:
ILcdBounded, ILcdCurve, ILcdPointList, ILcdPointList2, ILcdPolygon, ILcdPolypoint, ILcdRing, ILcdShape, ILcd2DEditablePointList, ILcd2DEditablePolygon, ILcd2DEditablePolypoint, ILcd2DEditableShape, ILcdCache, ILcdCloneable, ILcdInvalidateable, Serializable, Cloneable
public class TLcdLonLatRhumbPolygon extends TLcdLonLatPolypoint implements ILcd2DEditablePolygon, ILcdRing
This class provides an implementation of ILcd2DEditablePolygon in the geodetic space. In addition to the properties defined by ILcd2DEditablePolygon, a TLcdLonLatRhumbPolygon has an ellipsoid on which it lives.

Contrary to TLcdLonLatPolygon, the line segments are not located on geodesics. Instead the segments are lines of constant azimuth.

All longitude/latitude coordinates are expressed in degrees.

This class is thread-safe for concurrent read-only access of its contents. For read-write access, external locking must be used. Such locking is typically done at the model level.

Since:
9.0
See Also:

  • Constructor Details

    • TLcdLonLatRhumbPolygon

      public TLcdLonLatRhumbPolygon()
      Constructs a polygon with no points that is defined on the default ellipsoid.

    • TLcdLonLatRhumbPolygon

      public TLcdLonLatRhumbPolygon(ILcdEllipsoid aEllipsoid)
      Constructs a polygon with no points that is defined on the given ellipsoid.
      Parameters:
      aEllipsoid - the ellipsoid on which this shape is defined.

    • TLcdLonLatRhumbPolygon

      public TLcdLonLatRhumbPolygon(ILcd2DEditablePointList a2DEditablePointList)
      Constructs a polygon with the given point list on the default ellipsoid.
      Parameters:
      a2DEditablePointList - the point list that contains the points of the polygon.

    • TLcdLonLatRhumbPolygon

      public TLcdLonLatRhumbPolygon(ILcd2DEditablePointList a2DEditablePointList, ILcdEllipsoid aEllipsoid)
      Constructs a polygon with the given point list on the given ellipsoid.
      Parameters:
      a2DEditablePointList - the point list that contains the points of the polygon.
      aEllipsoid - the ellipsoid on which this shape is defined.

  • Method Details

    • getOrientation

      public int getOrientation()
      Description copied from interface: ILcdPolygon
      Returns the orientation of this ILcdPolygon: ILcdPolygon.CLOCKWISE or ILcdPolygon.COUNTERCLOCKWISE.
      Specified by:
      getOrientation in interface ILcdPolygon
      Returns:
      the orientation of this ILcdPolygon: ILcdPolygon.CLOCKWISE or ILcdPolygon.COUNTERCLOCKWISE. This method should not return INVALID_ORIENTATION, which is only to be used for resetting the orientation so that it can be recalculated.

    • setOrientation

      public final void setOrientation(int aOrientation)
      Sets the orientation of this ILcd2DEditablePolygon.

      Note: modifying the geometry of this polygon or modifying the ellipsoid setEllipsoid(com.luciad.geodesy.ILcdEllipsoid) will clear the orientation.

      Specified by:
      setOrientation in interface ILcd2DEditablePolygon
      Parameters:
      aOrientation - ILcd2DEditablePolygon.CLOCKWISE, ILcd2DEditablePolygon.COUNTERCLOCKWISE or ILcd2DEditablePolygon.INVALID_ORIENTATION.

    • getEllipsoid

      public ILcdEllipsoid getEllipsoid()
      Returns the ellipsoid on which this shape is defined.
      Returns:
      the ellipsoid on which this shape is defined.

    • setEllipsoid

      public void setEllipsoid(ILcdEllipsoid aEllipsoid)
      Sets the ellipsoid on which this shape is defined.
      Parameters:
      aEllipsoid - the new ellipsoid on which this shape is defined.

    • calculateBounds

      protected void calculateBounds()
      The bounds are determined by including all points that determine the Polygon. Sample points are taken on each line segment in order to take the geodesic characteristics into account. Since the maximum or minimum may be missed this way a small extension of the bounds is applied.
      Overrides:
      calculateBounds in class TLcdLonLatPolypoint

    • contains2D

      public boolean contains2D(ILcdPoint aPoint)
      Description copied from class: ALcdShape
      Checks whether this ALcdShape contains the given point in the 2D cartesian plane.
      Specified by:
      contains2D in interface ILcdShape
      Overrides:
      contains2D in class ALcdShape
      Parameters:
      aPoint - the point to test.
      Returns:
      the boolean result of the containment test.
      See Also:

    • contains2D

      public boolean contains2D(double x, double y)
      Description copied from interface: ILcdShape
      Checks whether this ILcdShape contains the given point in the 2D space. Only the first two dimensions of the ILcdShape are considered.
      Specified by:
      contains2D in interface ILcdShape
      Overrides:
      contains2D in class ALcd2DEditablePolypoint
      Parameters:
      x - the x coordinate of the point.
      y - the y coordinate of the point.
      Returns:
      the boolean result of the containment test.

    • set2DEditablePointList

      public void set2DEditablePointList(ILcd2DEditablePointList a2DEditablePointList)
      Overrides:
      set2DEditablePointList in class ALcd2DEditablePolypoint

    • move2DPoint

      public void move2DPoint(int aIndex, double aX, double aY)
      Description copied from interface: ILcd2DEditablePointList
      Moves the specified point of this ILcd2DEditablePointList to the given point in the 2D space. Only the first two dimensions of the ILcdShape are considered. The third dimension is left unchanged.
      Specified by:
      move2DPoint in interface ILcd2DEditablePointList
      Overrides:
      move2DPoint in class ALcd2DEditablePolypoint
      Parameters:
      aIndex - a valid index in the list of points.
      aX - the x coordinate of the point.
      aY - the y coordinate of the point.

    • translate2DPoint

      public void translate2DPoint(int aIndex, double aDeltaX, double aDeltaY)
      Description copied from interface: ILcd2DEditablePointList
      Translates the specified point of this ILcd2DEditablePointList from its current position over the given translation vector in the 2D space. Only the first two dimensions of the points are considered. The third dimension is left unchanged.
      Specified by:
      translate2DPoint in interface ILcd2DEditablePointList
      Overrides:
      translate2DPoint in class ALcd2DEditablePolypoint
      Parameters:
      aDeltaX - the x coordinate of the translation vector.
      aDeltaY - the y coordinate of the translation vector.

    • insert2DPoint

      public void insert2DPoint(int aIndex, double aX, double aY)
      Description copied from interface: ILcd2DEditablePointList
      Inserts a point at the given index into this ILcd2DEditablePointList.
      Specified by:
      insert2DPoint in interface ILcd2DEditablePointList
      Overrides:
      insert2DPoint in class ALcd2DEditablePolypoint
      Parameters:
      aIndex - a valid new index in the list of points.
      aX - the x coordinate of the new point.
      aY - the y coordinate of the new point.

    • removePointAt

      public void removePointAt(int aIndex)
      Description copied from interface: ILcd2DEditablePointList
      Removes the point at the given index from this ILcd2DEditablePointList.
      Specified by:
      removePointAt in interface ILcd2DEditablePointList
      Overrides:
      removePointAt in class ALcd2DEditablePolypoint
      Parameters:
      aIndex - a valid index in the list of ILcdPoint objects.

    • computePointSFCT

      public void computePointSFCT(double aParam, ILcd3DEditablePoint aPointSFCT)
      Description copied from interface: ILcdCurve
      Computes a point of the curve, defined by the given parameter.
      Specified by:
      computePointSFCT in interface ILcdCurve
      Parameters:
      aParam - a value of the closed interval [0,1]
      aPointSFCT - the point to store the computed curve point in

    • getEndPoint

      public ILcdPoint getEndPoint()
      Description copied from interface: ILcdCurve
      Retrieves the end point of the curve.

      This is equivalent to computePointSFCT(1).

      Specified by:
      getEndPoint in interface ILcdCurve
      Returns:
      the end point of the curve

    • getEndTangent2D

      public double getEndTangent2D()
      Description copied from interface: ILcdCurve
      Returns the angle of the curve's tangent at the end point, in degrees counterclockwise from the direction at 3 o'clock.

      The tangent orientation is from the end point, away from the curve before it.

      This is the same as getTangent2D(1).

      Specified by:
      getEndTangent2D in interface ILcdCurve
      Returns:
      the curve's angle in the end point

    • getInterpolation

      public String getInterpolation()
      Description copied from interface: ILcdCurve
      Returns the interpolation method used by this curve.

      A set of predefined constants are defined in this interface, which are used by the default ILcdCurve implementations provided by LuciadLightspeed.

      Custom implementations can define their own constants, and use them to interpret the interpolation of the curve.

      Specified by:
      getInterpolation in interface ILcdCurve
      Returns:
      the interpolation method used by this curve.

    • getLength2D

      public double getLength2D(double aParam1, double aParam2)
      Description copied from interface: ILcdCurve
      Returns the length between two points of the curve, defined by the given parameters.
      • When aParam1 == aParam2, the length is 0.
      • When aParam1 == 0 and aParam2 == 1, the length is the whole length of the curve.
      • When aParam1 > aParam2, the length is (aParam1 to 1) + (0 to aParam2).
      Specified by:
      getLength2D in interface ILcdCurve
      Parameters:
      aParam1 - a value of the closed interval [0,1]
      aParam2 - a value of the closed interval [0,1]
      Returns:
      the length of the curve.

    • getLineSegmentIntersectionCount

      public int getLineSegmentIntersectionCount(ILcdPoint aP1, ILcdPoint aP2)
      Description copied from interface: ILcdCurve
      Returns the number of intersections between this curve and a line segment defined by the two specified points.

      This information can be used to perform containment calculations, if this curve is closed or if this curve is part of a composite closed curve. By determining the number of intersections between this curve and a line segment starting from a given point in a fixed direction, one can determine whether a point is located within the closed curve by using the even-odd rule.

      Specified by:
      getLineSegmentIntersectionCount in interface ILcdCurve
      Parameters:
      aP1 - the first point of the line segment
      aP2 - the second point of the line segment
      Returns:
      the number of intersections between the curve and the line segment

    • getStartPoint

      public ILcdPoint getStartPoint()
      Description copied from interface: ILcdCurve
      Retrieves the start point of the curve.

      This is equivalent to computePointSFCT(0).

      Specified by:
      getStartPoint in interface ILcdCurve
      Returns:
      the start point of the curve

    • getStartTangent2D

      public double getStartTangent2D()
      Description copied from interface: ILcdCurve
      Returns the angle of the curve's tangent at the start point, in degrees counterclockwise from the direction at 3 o'clock.

      The tangent orientation is from the start point towards the rest of the shape.

      This is the same as getTangent2D(0).

      Specified by:
      getStartTangent2D in interface ILcdCurve
      Returns:
      the curve's angle in the start point

    • getTangent2D

      public double getTangent2D(double aParam)
      Description copied from interface: ILcdCurve
      Returns the angle of the curve's tangent in the point defined by the given parameter, in degrees counterclockwise from the direction at 3 o'clock.

      The tangent orientation is from the point at parameter aParam towards the rest of the shape.

      Specified by:
      getTangent2D in interface ILcdCurve
      Parameters:
      aParam - a value of the closed interval [0,1]
      Returns:
      the curve's angle in the point defined by the given parameter

    • clone

      public Object clone()
      Creates and returns a copy of this object.

      The contained editable points list is cloned.

      The contained ellipsoid is copied without being cloned.

      The cache, the bounds and the focus point are not copied or cloned at all, but recalculated when needed.

      Specified by:
      clone in interface ILcdCloneable
      Overrides:
      clone in class TLcdLonLatPolypoint
      See Also:

    • equals

      public boolean equals(Object aObject)
      Returns whether the given object has the same class, the same focus point, the same coordinates, and the same ellipsoid.
      Overrides:
      equals in class ALcd2DEditablePolypoint

    • hashCode

      public int hashCode()
      Description copied from class: ALcdShape
      The hash code of this shape is the hash code of its class, in order to be consistent with the ALcdShape.equals(Object) method. Extensions should refine this implementation, based on their properties.
      Overrides:
      hashCode in class ALcd2DEditablePolypoint