Package com.luciad.format.gml31.model

Class TLcdGML31Geodesic

java.lang.Object
com.luciad.datamodel.TLcdDataObject
com.luciad.datamodel.TLcdFeaturedDataObject
com.luciad.format.gml31.model.TLcdGML31AbstractCurveSegment
com.luciad.format.gml31.model.TLcdGML31GeodesicString
com.luciad.format.gml31.model.TLcdGML31Geodesic
All Implemented Interfaces:
ILcdDataObject, ILcdBounded, ILcdCurve, ILcdPointList, ILcdPolyline, ILcdShape, ILcd2DEditablePointList, ILcd2DEditablePolyline, ILcd2DEditableShape, ILcd3DEditablePointList, ILcd3DEditablePolyline, ILcd3DEditableShape, ILcdCloneable, ILcdDeepCloneable, ILcdFeatured, ILcdSelfDescribedFeatured, Serializable, Cloneable
public class TLcdGML31Geodesic extends TLcdGML31GeodesicString
Since:
10.0
See Also:

  • Field Details

    • INTERPOLATION_ATTR_PROPERTY

      public static final TLcdDataProperty INTERPOLATION_ATTR_PROPERTY
      Data property that maps to the interpolation attribute. The possible values for this property are instances of ELcdGML31CurveInterpolation.

    • POS_GROUP_PROPERTY

      public static final TLcdDataProperty POS_GROUP_PROPERTY
      Data property that maps to the choice between the posList and pos and pointProperty elements. The possible values for this property are instances of

    • NUM_DERIVATIVE_INTERIOR_PROPERTY

      public static final TLcdDataProperty NUM_DERIVATIVE_INTERIOR_PROPERTY
      Data property that maps to the numDerivativeInterior attribute. The possible values for this property are instances of long.

    • NUM_DERIVATIVES_AT_END_PROPERTY

      public static final TLcdDataProperty NUM_DERIVATIVES_AT_END_PROPERTY
      Data property that maps to the numDerivativesAtEnd attribute. The possible values for this property are instances of long.

    • NUM_DERIVATIVES_AT_START_PROPERTY

      public static final TLcdDataProperty NUM_DERIVATIVES_AT_START_PROPERTY
      Data property that maps to the numDerivativesAtStart attribute. The possible values for this property are instances of long.

  • Constructor Details

    • TLcdGML31Geodesic

      public TLcdGML31Geodesic()

    • TLcdGML31Geodesic

      public TLcdGML31Geodesic(TLcdDataType aType)

    • TLcdGML31Geodesic

      public TLcdGML31Geodesic(ILcdModelReference aModelReference)
      Constructs a new object for the given model reference. The posGroup of this object is set to a new TLcdGML31DirectPositionList initialized with the given model reference.
      Parameters:
      aModelReference - the model reference for this object

    • TLcdGML31Geodesic

      public TLcdGML31Geodesic(TLcdDataType aDataType, ILcdModelReference aModelReference)
      Constructs a new object for the given model reference. The posGroup of this object is set to a new TLcdGML31DirectPositionList initialized with the given model reference.
      Parameters:
      aDataType - the data type for this object
      aModelReference - the model reference for this object

  • Method Details

    • insert2DPoint

      public void insert2DPoint(int aIndex, double aX, double aY)
      Description copied from interface: ILcd2DEditablePointList
      Inserts a point at the given index into this ILcd2DEditablePointList.
      Specified by:
      insert2DPoint in interface ILcd2DEditablePointList
      Overrides:
      insert2DPoint in class TLcdGML31GeodesicString
      Parameters:
      aIndex - a valid new index in the list of points.
      aX - the x coordinate of the new point.
      aY - the y coordinate of the new point.

    • insert3DPoint

      public void insert3DPoint(int aIndex, double aX, double aY, double aZ)
      Description copied from interface: ILcd3DEditablePointList
      Inserts a point at the given index into this ILcd3DEditablePointList.
      Specified by:
      insert3DPoint in interface ILcd3DEditablePointList
      Overrides:
      insert3DPoint in class TLcdGML31GeodesicString
      Parameters:
      aIndex - a valid new index in the list of points.
      aX - the x coordinate of the new point.
      aY - the y coordinate of the new point.
      aZ - the z coordinate of the new point.

    • getInterpolationAttr

      public ELcdGML31CurveInterpolation getInterpolationAttr()
      Returns the value of the property that maps to the interpolation attribute.

      The attribute "interpolation" specifies the curve interpolation mechanism used for this segment. This mechanism uses the control points and control parameters to determine the position of this curve segment. For an GeodesicString the interpolation is fixed as "geodesic".

      Returns:
      the value of the INTERPOLATION_ATTR_PROPERTY property.

    • setInterpolationAttr

      public void setInterpolationAttr(ELcdGML31CurveInterpolation aValue)
      Sets the value of the property that maps to the interpolation attribute.

      The attribute "interpolation" specifies the curve interpolation mechanism used for this segment. This mechanism uses the control points and control parameters to determine the position of this curve segment. For an GeodesicString the interpolation is fixed as "geodesic".

      Parameters:
      aValue - the value to set for the INTERPOLATION_ATTR_PROPERTY property.

    • getPosGroup

      public Object getPosGroup()
      Returns the value of the property that maps to the choice between the posList and pos and pointProperty elements.

      The possible values for this property are instances of

      Returns:
      the value of the POS_GROUP_PROPERTY property.

    • setPosGroup

      public void setPosGroup(Object aValue)
      Sets the value of the property that maps to the choice between the posList and pos and pointProperty elements.

      The possible values for this property are instances of

      Parameters:
      aValue - the value to set for the POS_GROUP_PROPERTY property.

    • getNumDerivativeInterior

      public long getNumDerivativeInterior()
      Returns the value of the property that maps to the numDerivativeInterior attribute.

      The attribute "numDerivativesInterior" specifies the type of continuity that is guaranteed interior to the curve. The default value of "0" means simple continuity, which is a mandatory minimum level of continuity. This level is referred to as "C 0 " in mathematical texts. A value of 1 means that the function and its first derivative are continuous at the appropriate end point: "C 1 " continuity. A value of "n" for any integer means the function and its first n derivatives are continuous: "C n " continuity. NOTE: Use of these values is only appropriate when the basic curve definition is an underdetermined system. For example, line string segments cannot support continuity above C 0 , since there is no spare control parameter to adjust the incoming angle at the end points of the segment. Spline functions on the other hand often have extra degrees of freedom on end segments that allow them to adjust the values of the derivatives to support C 1 or higher continuity.

      Returns:
      the value of the NUM_DERIVATIVE_INTERIOR_PROPERTY property.

    • setNumDerivativeInterior

      public void setNumDerivativeInterior(long aValue)
      Sets the value of the property that maps to the numDerivativeInterior attribute.

      The attribute "numDerivativesInterior" specifies the type of continuity that is guaranteed interior to the curve. The default value of "0" means simple continuity, which is a mandatory minimum level of continuity. This level is referred to as "C 0 " in mathematical texts. A value of 1 means that the function and its first derivative are continuous at the appropriate end point: "C 1 " continuity. A value of "n" for any integer means the function and its first n derivatives are continuous: "C n " continuity. NOTE: Use of these values is only appropriate when the basic curve definition is an underdetermined system. For example, line string segments cannot support continuity above C 0 , since there is no spare control parameter to adjust the incoming angle at the end points of the segment. Spline functions on the other hand often have extra degrees of freedom on end segments that allow them to adjust the values of the derivatives to support C 1 or higher continuity.

      Parameters:
      aValue - the value to set for the NUM_DERIVATIVE_INTERIOR_PROPERTY property.

    • getNumDerivativesAtEnd

      public long getNumDerivativesAtEnd()
      Returns the value of the property that maps to the numDerivativesAtEnd attribute.

      The attribute "numDerivativesAtEnd" specifies the type of continuity between this curve segment and its successor. If this is the last curve segment in the curve, one of these values, as appropriate, is ignored. The default value of "0" means simple continuity, which is a mandatory minimum level of continuity. This level is referred to as "C 0 " in mathematical texts. A value of 1 means that the function and its first derivative are continuous at the appropriate end point: "C 1 " continuity. A value of "n" for any integer means the function and its first n derivatives are continuous: "C n " continuity. NOTE: Use of these values is only appropriate when the basic curve definition is an underdetermined system. For example, line string segments cannot support continuity above C 0 , since there is no spare control parameter to adjust the incoming angle at the end points of the segment. Spline functions on the other hand often have extra degrees of freedom on end segments that allow them to adjust the values of the derivatives to support C 1 or higher continuity.

      Returns:
      the value of the NUM_DERIVATIVES_AT_END_PROPERTY property.

    • setNumDerivativesAtEnd

      public void setNumDerivativesAtEnd(long aValue)
      Sets the value of the property that maps to the numDerivativesAtEnd attribute.

      The attribute "numDerivativesAtEnd" specifies the type of continuity between this curve segment and its successor. If this is the last curve segment in the curve, one of these values, as appropriate, is ignored. The default value of "0" means simple continuity, which is a mandatory minimum level of continuity. This level is referred to as "C 0 " in mathematical texts. A value of 1 means that the function and its first derivative are continuous at the appropriate end point: "C 1 " continuity. A value of "n" for any integer means the function and its first n derivatives are continuous: "C n " continuity. NOTE: Use of these values is only appropriate when the basic curve definition is an underdetermined system. For example, line string segments cannot support continuity above C 0 , since there is no spare control parameter to adjust the incoming angle at the end points of the segment. Spline functions on the other hand often have extra degrees of freedom on end segments that allow them to adjust the values of the derivatives to support C 1 or higher continuity.

      Parameters:
      aValue - the value to set for the NUM_DERIVATIVES_AT_END_PROPERTY property.

    • getNumDerivativesAtStart

      public long getNumDerivativesAtStart()
      Returns the value of the property that maps to the numDerivativesAtStart attribute.

      The attribute "numDerivativesAtStart" specifies the type of continuity between this curve segment and its predecessor. If this is the first curve segment in the curve, one of these values, as appropriate, is ignored. The default value of "0" means simple continuity, which is a mandatory minimum level of continuity. This level is referred to as "C 0 " in mathematical texts. A value of 1 means that the function and its first derivative are continuous at the appropriate end point: "C 1 " continuity. A value of "n" for any integer means the function and its first n derivatives are continuous: "C n " continuity. NOTE: Use of these values is only appropriate when the basic curve definition is an underdetermined system. For example, line string segments cannot support continuity above C 0 , since there is no spare control parameter to adjust the incoming angle at the end points of the segment. Spline functions on the other hand often have extra degrees of freedom on end segments that allow them to adjust the values of the derivatives to support C 1 or higher continuity.

      Returns:
      the value of the NUM_DERIVATIVES_AT_START_PROPERTY property.

    • setNumDerivativesAtStart

      public void setNumDerivativesAtStart(long aValue)
      Sets the value of the property that maps to the numDerivativesAtStart attribute.

      The attribute "numDerivativesAtStart" specifies the type of continuity between this curve segment and its predecessor. If this is the first curve segment in the curve, one of these values, as appropriate, is ignored. The default value of "0" means simple continuity, which is a mandatory minimum level of continuity. This level is referred to as "C 0 " in mathematical texts. A value of 1 means that the function and its first derivative are continuous at the appropriate end point: "C 1 " continuity. A value of "n" for any integer means the function and its first n derivatives are continuous: "C n " continuity. NOTE: Use of these values is only appropriate when the basic curve definition is an underdetermined system. For example, line string segments cannot support continuity above C 0 , since there is no spare control parameter to adjust the incoming angle at the end points of the segment. Spline functions on the other hand often have extra degrees of freedom on end segments that allow them to adjust the values of the derivatives to support C 1 or higher continuity.

      Parameters:
      aValue - the value to set for the NUM_DERIVATIVES_AT_START_PROPERTY property.