public class TLcdLonLatHeightPolygon extends TLcdLonLatHeightPolypoint implements ILcd3DEditablePolygon, ILcd2DEditablePolygon, ILcdRing
ILcd3DEditablePolygon
in the geodetic space.
This class is thread-safe for concurrent read-only access of its contents. For read-write access, external locking must be used. Such locking is typically done at the model level.
Note that the ILcd3DEditablePointList representing the actual geometry should provide geodetic points (TLcdLonLatHeightPoint), not cartesian (TLcdXYZPoint).
CLOCKWISE, COUNTERCLOCKWISE, INVALID_ORIENTATION
INTERPOLATION_CIRCLE_BY_3POINTS, INTERPOLATION_CIRCLE_BY_CENTERPOINT, INTERPOLATION_CIRCULARARC_BY_3POINTS, INTERPOLATION_CIRCULARARC_BY_BULGE, INTERPOLATION_CIRCULARARC_BY_CENTERPOINT, INTERPOLATION_ELLIPTICAL, INTERPOLATION_GEODESIC, INTERPOLATION_LINEAR, INTERPOLATION_MIXED, INTERPOLATION_RHUMB
Constructor and Description |
---|
TLcdLonLatHeightPolygon()
Creates an empty polygon on a default (WGS 84) ellipsoid.
|
TLcdLonLatHeightPolygon(ILcd3DEditablePointList a3DEditablePointList)
Creates a polygon using the given point list.
|
TLcdLonLatHeightPolygon(ILcd3DEditablePointList a3DEditablePointList,
ILcdEllipsoid aEllipsoid)
Creates a polygon using the given point list.
|
TLcdLonLatHeightPolygon(TLcdLonLatHeightPolygon aLonLatHeightPolygon)
Creates copy of another polygon.
|
TLcdLonLatHeightPolygon(TLcdLonLatHeightPolygon aLonLatHeightPolygon,
boolean aDeepCopy)
Creates a polygon based on another polygon.
|
Modifier and Type | Method and Description |
---|---|
protected ILcd3DEditableBounds |
calculateBounds()
This method should compute the bounds of the polypoint.
|
Object |
clone()
Creates and returns a copy of this object.
|
void |
computePointSFCT(double aParam,
ILcd3DEditablePoint aPointSFCT)
Computes a point of the curve, defined by the given parameter.
|
boolean |
contains2D(double aLon,
double aLat)
Determines whether this
contains the given point. |
boolean |
contains2D(ILcdPoint aPoint)
Checks whether this
ALcdShape contains the given point in the
2D cartesian plane. |
boolean |
contains3D(double aX,
double aY,
double aZ)
Returns whether the specified point is contained within this polygon.
|
boolean |
contains3D(ILcdPoint aPoint)
Checks whether this
ALcdShape contains the given point in the
3D space. |
ILcdEllipsoid |
getEllipsoid()
Get the ellipsoid used for this polygon.
|
ILcdPoint |
getEndPoint()
Retrieves the end point of the curve.
|
double |
getEndTangent2D()
Returns the angle of the curve's tangent at the end point,
in degrees counterclockwise from the direction at 3 o'clock.
|
String |
getInterpolation()
Returns the interpolation method used by this curve.
|
double |
getLength2D(double aParam1,
double aParam2)
Returns the length between two points of the curve,
defined by the given parameters.
|
int |
getLineSegmentIntersectionCount(ILcdPoint aP1,
ILcdPoint aP2)
Returns the number of intersections between this curve and a line segment
defined by the two specified points.
|
int |
getOrientation()
Returns the orientation of this
ILcdPolygon :
ILcdPolygon.CLOCKWISE or ILcdPolygon.COUNTERCLOCKWISE . |
ILcdPoint |
getStartPoint()
Retrieves the start point of the curve.
|
double |
getStartTangent2D()
Returns the angle of the curve's tangent at the start point,
in degrees counterclockwise from the direction at 3 o'clock.
|
double |
getTangent2D(double aParam)
Returns the angle of the curve's tangent in the point defined
by the given parameter, in degrees counterclockwise from the
direction at 3 o'clock.
|
void |
setEllipsoid(ILcdEllipsoid aEllipsoid)
Set the ellipsoid used for this polygon.
|
void |
setOrientation(int aOrientation)
Sets the orientation of this
ILcd2DEditablePolygon . |
calculateFocusPoint
clearCache, equals, get3DEditablePointList, getBounds, getCachedObject, getFocusPoint, getPoint, getPointCount, getPointSFCT, getX, getY, getZ, hashCode, insert2DPoint, insert3DPoint, insertIntoCache, invalidateBounds, move2D, move2DPoint, move3DPoint, removeCachedObject, removePointAt, set3DEditablePointList, set3DEditablePointList, setFocusPoint, toString, translate2D, translate2DPoint, translate3D, translate3DPoint
move3D, move3D
move2D
fromDomainObject
finalize, getClass, notify, notifyAll, wait, wait, wait
move3D, move3D, translate3D
move2D, move2D, translate2D
getFocusPoint
getBounds
insert3DPoint, move3DPoint, removePointAt, translate3D, translate3DPoint
append2DPoint, insert2DPoint, move2DPoint, translate2D, translate2DPoint
getPoint, getPointCount, getPointSFCT, getX, getY, getZ
clearCache, getCachedObject, insertIntoCache, removeCachedObject
public TLcdLonLatHeightPolygon()
public TLcdLonLatHeightPolygon(ILcd3DEditablePointList a3DEditablePointList)
TLcdLonLatHeightPoint
sa3DEditablePointList
- A point list containing lon-lat points.public TLcdLonLatHeightPolygon(ILcd3DEditablePointList a3DEditablePointList, ILcdEllipsoid aEllipsoid)
TLcdLonLatHeightPoint
sa3DEditablePointList
- A point list containing lon-lat points.aEllipsoid
- the ellipsoid on which to define the polygonpublic TLcdLonLatHeightPolygon(TLcdLonLatHeightPolygon aLonLatHeightPolygon, boolean aDeepCopy)
aDeepCopy
is true, and the given polygon has a cloneable pointlist
(see ILcdCloneable
, for example TLcd3DEditablePointList
), the underlying
points will be cloned.
aLonLatHeightPolygon
- The polygon to copyaDeepCopy
- whether to make a copy of the points, if possiblepublic TLcdLonLatHeightPolygon(TLcdLonLatHeightPolygon aLonLatHeightPolygon)
aLonLatHeightPolygon
- The polygon to copypublic ILcdEllipsoid getEllipsoid()
public void setEllipsoid(ILcdEllipsoid aEllipsoid)
aEllipsoid
- the new ellipsoidpublic int getOrientation()
ILcdPolygon
ILcdPolygon
:
ILcdPolygon.CLOCKWISE
or ILcdPolygon.COUNTERCLOCKWISE
.getOrientation
in interface ILcdPolygon
ILcdPolygon
:
ILcdPolygon.CLOCKWISE
or ILcdPolygon.COUNTERCLOCKWISE
.
This method should not return INVALID_ORIENTATION
, which is only to be used for resetting the orientation
so that it can be recalculated.public void setOrientation(int aOrientation)
ILcd2DEditablePolygon
.
Note: modifying the geometry of this polygon or modifying the ellipsoid
setEllipsoid(com.luciad.geodesy.ILcdEllipsoid)
will clear the
orientation.
setOrientation
in interface ILcd2DEditablePolygon
aOrientation
- ILcd2DEditablePolygon.CLOCKWISE
,
ILcd2DEditablePolygon.COUNTERCLOCKWISE
or ILcd2DEditablePolygon.INVALID_ORIENTATION
.protected ILcd3DEditableBounds calculateBounds()
ALcd3DEditablePolypoint
ILcd2DEditableBounds
should be stored in fBounds
.calculateBounds
in class TLcdLonLatHeightPolypoint
public boolean contains2D(ILcdPoint aPoint)
ALcdShape
ALcdShape
contains the given point in the
2D cartesian plane.contains2D
in interface ILcdShape
contains2D
in class ALcdShape
aPoint
- the point to test.ILcdShape.contains2D(double, double)
public boolean contains3D(ILcdPoint aPoint)
ALcdShape
ALcdShape
contains the given point in the
3D space.contains3D
in interface ILcdShape
contains3D
in class ALcdShape
aPoint
- the point to test.ILcdShape.contains3D(double, double, double)
public boolean contains3D(double aX, double aY, double aZ)
contains2D
test.contains3D
in interface ILcdShape
contains3D
in class ALcd3DEditablePolypoint
aX
- the first coordinate of the pointaY
- the second coordinate of the pointaZ
- the third coordinate of the pointpublic boolean contains2D(double aLon, double aLat)
contains the given point. This method uses the
TLcdSphereUtil method.contains2D
in interface ILcdShape
contains2D
in class ALcd3DEditablePolypoint
aLon
- the x coordinate of the point.aLat
- the y coordinate of the point.public Object clone()
clone
in interface ILcdCloneable
clone
in class TLcdLonLatHeightPolypoint
Object.clone()
public void computePointSFCT(double aParam, ILcd3DEditablePoint aPointSFCT)
ILcdCurve
ILcdCurve.getStartPoint()
.ILcdCurve.getEndPoint()
.computePointSFCT
in interface ILcdCurve
aParam
- a value of the closed interval [0,1]aPointSFCT
- the point to store the computed curve point inpublic ILcdPoint getEndPoint()
ILcdCurve
This is equivalent to computePointSFCT(1)
.
getEndPoint
in interface ILcdCurve
public double getEndTangent2D()
ILcdCurve
The tangent orientation is from the end point, away from the curve before it.
This is the same as getTangent2D(1)
.
getEndTangent2D
in interface ILcdCurve
public String getInterpolation()
ILcdCurve
A set of predefined constants are defined in this interface,
which are used by the default ILcdCurve
implementations
provided by LuciadLightspeed.
Custom implementations can define their own constants, and use them to interpret the interpolation of the curve.
getInterpolation
in interface ILcdCurve
public double getLength2D(double aParam1, double aParam2)
ILcdCurve
aParam1 == aParam2
, the length is 0.aParam1 == 0 and aParam2 == 1
, the length is the whole length of the curve.aParam1 > aParam2
, the length is (aParam1 to 1
) + (0 to aParam2
).getLength2D
in interface ILcdCurve
aParam1
- a value of the closed interval [0,1]aParam2
- a value of the closed interval [0,1]public int getLineSegmentIntersectionCount(ILcdPoint aP1, ILcdPoint aP2)
ILcdCurve
This information can be used to perform containment calculations, if this curve is closed or if this curve is part of a composite closed curve. By determining the number of intersections between this curve and a line segment starting from a given point in a fixed direction, one can determine whether a point is located within the closed curve by using the even-odd rule.
getLineSegmentIntersectionCount
in interface ILcdCurve
aP1
- the first point of the line segmentaP2
- the second point of the line segmentpublic ILcdPoint getStartPoint()
ILcdCurve
This is equivalent to computePointSFCT(0)
.
getStartPoint
in interface ILcdCurve
public double getStartTangent2D()
ILcdCurve
The tangent orientation is from the start point towards the rest of the shape.
This is the same as getTangent2D(0)
.
getStartTangent2D
in interface ILcdCurve
public double getTangent2D(double aParam)
ILcdCurve
The tangent orientation is from the point at parameter aParam
towards the rest of the shape.
ILcdCurve.getStartTangent2D()
.ILcdCurve.getEndTangent2D()
.getTangent2D
in interface ILcdCurve
aParam
- a value of the closed interval [0,1]