com.luciad.shape.shape3D

LuciadFusionClass TLcdLonLatHeightVariableGeoBuffer

java.lang.Object

com.luciad.shape.ALcdShape

com.luciad.shape.shape2D.ALcd2DEditableShape

com.luciad.shape.shape3D.ALcd3DEditableShape

com.luciad.shape.shape3D.TLcdLonLatHeightVariableGeoBuffer

All Implemented Interfaces:

ILcdBounded, ILcdShape, ILcdVariableGeoBuffer, ILcd2DEditableShape, ILcd2DEditableVariableGeoBuffer, ILcd3DEditableShape, ILcd3DEditableVariableGeoBuffer, ILcdCache, ILcdCloneable, Serializable, Cloneable

public class TLcdLonLatHeightVariableGeoBuffer
extends ALcd3DEditableShape
implements ILcd3DEditableVariableGeoBuffer, ILcdCache

This class represents a variable buffer around a polyline on an ellipsoid, in the geodetic space.

This class is thread-safe for concurrent read-only access of its contents. For read-write access, external locking must be used. Such locking is typically done at the model level.

This buffer implementation has the following limitations:

• Contours with holes (i.e., caused by axis intersections) cannot be represented, since the contour is modeled as a single polygon (ILcdPolygon).
• the corners of the contour at the axis points are sharp instead of rounded, which make it less suitable for buffers that have sharp angles between its consecutive axis segments; it has also has as consequence that the distance between the contour and the axis exceeds the given buffer distance in the corners,
• the calculated contour is only an estimate, because it uses a reduced number of contour points; when the start and end point of a segment are further removed from each other, the connected contour lines no longer lie at the given distance from the axis at each intermediate point.

Since:

2012.1

See Also:

Serialized Form

Constructor Summary

Constructors

Constructor and Description
TLcdLonLatHeightVariableGeoBuffer(ILcdEllipsoid aEllipsoid) Creates a new buffer without axis points.
TLcdLonLatHeightVariableGeoBuffer(ILcdPointList aAxis, double[] aWidth, double[] aHeightBelow, double[] aHeightAbove, ILcdEllipsoid aEllipsoid) Creates a new buffer using the given axis, and with the given widths and heights (below and above) for every point of the axis.
TLcdLonLatHeightVariableGeoBuffer(ILcdPointList aAxis, double[] aWidth, double[] aHeight, ILcdEllipsoid aEllipsoid) Creates a new buffer using the given axis, and with the given widths and heights for every point of the axis.
TLcdLonLatHeightVariableGeoBuffer(ILcdPointList aAxis, double aWidth, double aHeight, ILcdEllipsoid aEllipsoid) Creates a new buffer using the given axis, and with the same given width and height for every point of the axis.
TLcdLonLatHeightVariableGeoBuffer(TLcdLonLatHeightVariableGeoBuffer aBuffer) Creates a new variable geo buffer as a copy of the given buffer.

Method Summary

Modifier and Type	Method and Description
void	clearCache() Clears the cache.
Object	clone() Creates and returns a clone of this buffer.
boolean	contains2D(double aX, double aY) Checks whether this buffer contains the given point in the 2D space.
boolean	contains2D(ILcdPoint aPoint) Checks whether this buffer contains the given point in the 2D space.
boolean	contains3D(double aX, double aY, double aZ) Checks whether this buffer contains the given point in the 3D space.
boolean	contains3D(ILcdPoint aPoint) Checks whether this buffer contains the given point in the 3D space.
boolean	equals(Object o) Indicates whether some other object is "equal to" this one.
ILcd3DEditablePointList	getBaseShape() Returns the base polyline of the buffer.
ILcdBounds	getBounds() Returns the ILcdBounds by which the geometry of this ILcdBounded object is bounded.
Object	getCachedObject(Object aKey) Looks up and returns the cached Object corresponding to the given key.
ILcdEllipsoid	getEllipsoid() Returns the ellipsoid on which this buffer is defined.
ILcdPoint	getFocusPoint() Returns the focus point of this ILcdShape.
double	getHeightAbove(int aIndex) Returns the height of this buffer above the base polyline point with the given index, expressed in meters.
double	getHeightBelow(int aIndex) Returns the height of this buffer below the base polyline point with the given index, expressed in meters.
double	getWidth(int aIndex) Returns the width of this buffer at the given point index, expressed in meters.
int	hashCode() Returns a hash code value for the object.
void	insertIntoCache(Object aKey, Object aObject) Inserts a cache Object corresponding to the given key Object.
Object	removeCachedObject(Object aKey) Looks up and removes the cached Object corresponding to the given key.
void	setEllipsoid(ILcdEllipsoid aEllipsoid) Sets the ellipsoid on which this buffer is defined.
void	setHeight(int aIndex, double aHeight) Convenience operation that sets both the buffer height above and below the given point index, expressed in meters.
void	setHeightAbove(int aIndex, double aHeight) Sets the height of this buffer above the base polyline point with the given index, expressed in meters.
void	setHeightBelow(int aIndex, double aHeight) Sets the height of this buffer below the base polyline point with the given index, expressed in meters.
void	setWidth(int aIndex, double aWidth) Sets the width of this buffer at the given point index, expressed in meters.
String	toString() Returns a String representation of this object.
void	translate2D(double aDeltaX, double aDeltaY) Translates this ILcd2DEditableShape from its current position over the given translation vector in the 2D space.
void	translate3D(double aDeltaX, double aDeltaY, double aDeltaZ) Translates this ILcd3DEditableShape from its current position over the given translation vector in the 3D space.

Methods inherited from class com.luciad.shape.shape3D.ALcd3DEditableShape

move3D, move3D

Methods inherited from class com.luciad.shape.shape2D.ALcd2DEditableShape

move2D, move2D

Methods inherited from class com.luciad.shape.ALcdShape

fromDomainObject

Methods inherited from class java.lang.Object

finalize, getClass, notify, notifyAll, wait, wait, wait

Methods inherited from interface com.luciad.shape.shape3D.ILcd3DEditableShape

move3D, move3D

Methods inherited from interface com.luciad.shape.shape2D.ILcd2DEditableShape

move2D, move2D

Constructor Detail

TLcdLonLatHeightVariableGeoBuffer

public TLcdLonLatHeightVariableGeoBuffer(ILcdEllipsoid aEllipsoid)

Creates a new buffer without axis points.

Parameters:

aEllipsoid - the ellipsoid on which this buffer is defined.

TLcdLonLatHeightVariableGeoBuffer

public TLcdLonLatHeightVariableGeoBuffer(ILcdPointList aAxis,
                                         double aWidth,
                                         double aHeight,
                                         ILcdEllipsoid aEllipsoid)

Creates a new buffer using the given axis, and with the same given width and height for every point of the axis.

Note: The axis will be cloned, hence getBaseShape() does not return the same point list.

Parameters:

aAxis - the axis.

aWidth - the (same) width at every point of the axis.

aHeight - the (same) height at every point of the axis.

aEllipsoid - the ellipsoid on which this buffer is defined.

TLcdLonLatHeightVariableGeoBuffer

public TLcdLonLatHeightVariableGeoBuffer(ILcdPointList aAxis,
                                         double[] aWidth,
                                         double[] aHeight,
                                         ILcdEllipsoid aEllipsoid)

Creates a new buffer using the given axis, and with the given widths and heights for every point of the axis.

Note: The axis will be cloned, hence getBaseShape() does not return the same point list.

Parameters:

aAxis - the axis.

aWidth - the widths for every point of the axis. This array should have a length of aAxis.getPointCount().

aHeight - the heights for every point of the axis. This array should have a length of aAxis.getPointCount().

aEllipsoid - the ellipsoid on which this buffer is defined.

TLcdLonLatHeightVariableGeoBuffer

public TLcdLonLatHeightVariableGeoBuffer(ILcdPointList aAxis,
                                         double[] aWidth,
                                         double[] aHeightBelow,
                                         double[] aHeightAbove,
                                         ILcdEllipsoid aEllipsoid)

Creates a new buffer using the given axis, and with the given widths and heights (below and above) for every point of the axis.

Note: The axis will be cloned, hence getBaseShape() does not return the same point list.

Parameters:

aAxis - the axis.

aWidth - the widths for every point of the axis. This array should have a length of aAxis.getPointCount().

aHeightBelow - the height below for every point of the axis. This array should have a length of aAxis.getPointCount().

aHeightAbove - the height above for every point of the axis. This array should have a length of aAxis.getPointCount().

aEllipsoid - the ellipsoid on which this buffer is defined.

TLcdLonLatHeightVariableGeoBuffer

public TLcdLonLatHeightVariableGeoBuffer(TLcdLonLatHeightVariableGeoBuffer aBuffer)

Creates a new variable geo buffer as a copy of the given buffer.

Parameters:

aBuffer - a variable geo buffer.

Method Detail

setEllipsoid

public void setEllipsoid(ILcdEllipsoid aEllipsoid)

Sets the ellipsoid on which this buffer is defined.

Parameters:

aEllipsoid - the ellipsoid on which this buffer is defined.

getEllipsoid

public ILcdEllipsoid getEllipsoid()

Returns the ellipsoid on which this buffer is defined.

Returns:

the ellipsoid on which this buffer is defined.

getBaseShape

public ILcd3DEditablePointList getBaseShape()

Description copied from interface: ILcdVariableGeoBuffer

Returns the base polyline of the buffer.

Specified by:

getBaseShape in interface ILcdVariableGeoBuffer

Specified by:

getBaseShape in interface ILcd2DEditableVariableGeoBuffer

Specified by:

getBaseShape in interface ILcd3DEditableVariableGeoBuffer

Returns:

the base polyline of the buffer.

getWidth

public double getWidth(int aIndex)
                throws IndexOutOfBoundsException

Description copied from interface: ILcdVariableGeoBuffer

Returns the width of this buffer at the given point index, expressed in meters. This width is defined as the distance from the respective point in the base polyline, in a direction perpendicular to the segments of the base polyline containing the respective point. This is also illustrated in the class doc of this interface.

Specified by:

getWidth in interface ILcdVariableGeoBuffer

Parameters:

aIndex - the base shape point index to return the width for

Returns:

a positive integer (>= 0) representing the width of the buffer at the given point

Throws:

IndexOutOfBoundsException - if the base polyline does not have a point for the given index

setWidth

public void setWidth(int aIndex,
                     double aWidth)
              throws IndexOutOfBoundsException

Description copied from interface: ILcd2DEditableVariableGeoBuffer

Sets the width of this buffer at the given point index, expressed in meters. This width is defined as the distance from the respective point in the base polyline, in a direction perpendicular to the segments of the base polyline containing the respective point.

Specified by:

setWidth in interface ILcd2DEditableVariableGeoBuffer

Parameters:

aIndex - the base shape point index to set the width for

aWidth - a positive integer (width >= 0) representing the width of the buffer at the given point

Throws:

IndexOutOfBoundsException - if the base polyline does not have a point for the given index

See Also:

ILcdVariableGeoBuffer.getWidth(int)

getHeightBelow

public double getHeightBelow(int aIndex)
                      throws IndexOutOfBoundsException

Description copied from interface: ILcdVariableGeoBuffer

Returns the height of this buffer below the base polyline point with the given index, expressed in meters. This height is defined as the distance between the respective point and the lower side of the contour at that point.

Specified by:

getHeightBelow in interface ILcdVariableGeoBuffer

Parameters:

aIndex - the base shape point index to return the height for

Returns:

a positive integer (>= 0) representing the distance between the respective point and the lower side of the contour at that point

Throws:

IndexOutOfBoundsException - if the base polyline does not have a point for the given index

setHeightBelow

public void setHeightBelow(int aIndex,
                           double aHeight)
                    throws IndexOutOfBoundsException

Description copied from interface: ILcd3DEditableVariableGeoBuffer

Sets the height of this buffer below the base polyline point with the given index, expressed in meters. This height is defined as the distance between the respective point and the lower side of the contour at that point.

Specified by:

setHeightBelow in interface ILcd3DEditableVariableGeoBuffer

Parameters:

aIndex - the base shape point index to set the height for

aHeight - a positive integer (>= 0) representing the distance between the respective point and the lower side of the contour at that point

Throws:

IndexOutOfBoundsException - if the base polyline does not have a point for the given index

getHeightAbove

public double getHeightAbove(int aIndex)
                      throws IndexOutOfBoundsException

Description copied from interface: ILcdVariableGeoBuffer

Returns the height of this buffer above the base polyline point with the given index, expressed in meters. This height is defined as the distance between the respective point and the upper side of the contour at that point.

Specified by:

getHeightAbove in interface ILcdVariableGeoBuffer

Parameters:

aIndex - the base shape point index to return the height for

Returns:

a positive integer (>= 0) representing the distance between the respective point and the upper side of the contour at that point

Throws:

IndexOutOfBoundsException - if the base polyline does not have a point for the given index

setHeightAbove

public void setHeightAbove(int aIndex,
                           double aHeight)
                    throws IndexOutOfBoundsException

Description copied from interface: ILcd3DEditableVariableGeoBuffer

Sets the height of this buffer above the base polyline point with the given index, expressed in meters. This height is defined as the distance between the respective point and the upper side of the contour at that point.

Specified by:

setHeightAbove in interface ILcd3DEditableVariableGeoBuffer

Parameters:

aIndex - the base shape point index to set the height for

aHeight - a positive integer (>= 0) representing the distance between the respective point and the upper side of the contour at that point

Throws:

IndexOutOfBoundsException - if the base polyline does not have a point for the given index

setHeight

public void setHeight(int aIndex,
                      double aHeight)
               throws IndexOutOfBoundsException

Convenience operation that sets both the buffer height above and below the given point index, expressed in meters.

Parameters:

aIndex - the base shape point index to set the height for

aHeight - a positive integer (>= 0) representing the height of the buffer above and below the given point

Throws:

IndexOutOfBoundsException - if the base polyline does not have a point for the given index

See Also:

setHeightAbove(int, double), setHeightBelow(int, double)

translate2D

public void translate2D(double aDeltaX,
                        double aDeltaY)

Description copied from interface: ILcd2DEditableShape

Translates this ILcd2DEditableShape from its current position over the given translation vector in the 2D space. Only the first two dimensions of the ILcdShape are considered. The third dimension is left unchanged.

Specified by:

translate2D in interface ILcd2DEditableShape

Parameters:

aDeltaX - the x coordinate of the translation vector.

aDeltaY - the y coordinate of the translation vector.

translate3D

public void translate3D(double aDeltaX,
                        double aDeltaY,
                        double aDeltaZ)

Description copied from interface: ILcd3DEditableShape

Translates this ILcd3DEditableShape from its current position over the given translation vector in the 3D space.

Specified by:

translate3D in interface ILcd3DEditableShape

Parameters:

aDeltaX - the x coordinate of the translation vector.

aDeltaY - the y coordinate of the translation vector.

aDeltaZ - the z coordinate of the translation vector.

getFocusPoint

public ILcdPoint getFocusPoint()

Description copied from interface: ILcdShape

Returns the focus point of this ILcdShape.

Specified by:

getFocusPoint in interface ILcdShape

Returns:

the focus point of this ILcdShape.

getBounds

public ILcdBounds getBounds()

Description copied from interface: ILcdBounded

Returns the ILcdBounds by which the geometry of this ILcdBounded object is bounded.

If the geometry does not allow retrieving valid bounds (for example a polyline with 0 points) the return value is unspecified. It is highly recommended to return an undefined bounds. You can create undefined bounds using the default constructors of TLcdLonLatBounds or TLcdXYBounds.

Specified by:

getBounds in interface ILcdBounded

Returns:

the ILcdBounds by which the geometry of this ILcdBounded object is bounded.

contains2D

public boolean contains2D(double aX,
                          double aY)

Checks whether this buffer contains the given point in the 2D space. Only the first two dimensions of the buffer are considered.

Specified by:

contains2D in interface ILcdShape

Parameters:

aX - the x coordinate of the point.

aY - the y coordinate of the point.

Returns:

the boolean result of the containment test.

contains2D

public boolean contains2D(ILcdPoint aPoint)

Checks whether this buffer contains the given point in the 2D space. Only the first two dimensions of the buffer are considered.

Specified by:

contains2D in interface ILcdShape

Overrides:

contains2D in class ALcdShape

Parameters:

aPoint - the point to test

Returns:

the boolean result of the containment test.

See Also:

ILcdShape.contains2D(double, double)

contains3D

public boolean contains3D(ILcdPoint aPoint)

Checks whether this buffer contains the given point in the 3D space.

Specified by:

contains3D in interface ILcdShape

Overrides:

contains3D in class ALcdShape

Parameters:

aPoint - the point to test.

Returns:

the boolean result of the containment test.

See Also:

ILcdShape.contains3D(double, double, double)

contains3D

public boolean contains3D(double aX,
                          double aY,
                          double aZ)

Checks whether this buffer contains the given point in the 3D space.

Specified by:

contains3D in interface ILcdShape

Overrides:

contains3D in class ALcd2DEditableShape

Parameters:

aX - the x coordinate of the point.

aY - the y coordinate of the point.

aZ - the z coordinate of the point.

Returns:

the boolean result of the containment test.

equals

public boolean equals(Object o)

Indicates whether some other object is "equal to" this one.

Overrides:

equals in class ALcdShape

Parameters:

o - the other object

Returns:

whether some other object is "equal to" this one.

See Also:

Object.equals(Object)

hashCode

public int hashCode()

Returns a hash code value for the object.

Overrides:

hashCode in class ALcdShape

Returns:

a hash code value for the object.

See Also:

Object.hashCode()

toString

public String toString()

Returns a String representation of this object.

Overrides:

toString in class Object

Returns:

a String representation of this object.

clone

public Object clone()

Creates and returns a clone of this buffer.

Specified by:

clone in interface ILcdCloneable

Overrides:

clone in class ALcdShape

See Also:

Object.clone()

insertIntoCache

public void insertIntoCache(Object aKey,
                            Object aObject)

Description copied from interface: ILcdCache

Inserts a cache Object corresponding to the given key Object.

Specified by:

insertIntoCache in interface ILcdCache

Parameters:

aKey - the key Object that will be used to identify the Object. The key must therefore be a unique identifier, typically the caller itself: insertIntoCache(this, ...).

aObject - the Object to be cached.

getCachedObject

public Object getCachedObject(Object aKey)

Description copied from interface: ILcdCache

Looks up and returns the cached Object corresponding to the given key.

Specified by:

getCachedObject in interface ILcdCache

Parameters:

aKey - the key Object that was used for storing the cache Object.

Returns:

the cached Object, or null if there is no Object corresponding to the given key.

removeCachedObject

public Object removeCachedObject(Object aKey)

Description copied from interface: ILcdCache

Looks up and removes the cached Object corresponding to the given key.

Specified by:

removeCachedObject in interface ILcdCache

Parameters:

aKey - the key Object that was used for storing the cache Object.

Returns:

the cached Object, or null if there was no Object corresponding to the given key.

clearCache

public void clearCache()

Description copied from interface: ILcdCache

Clears the cache.

Specified by:

clearCache in interface ILcdCache