public class TLcdCompositeCurve extends ALcdShape implements ILcdEditableCompositeCurve, ILcdCache
ILcdEditableCompositeCurve
.
This class is thread-safe for concurrent read-only access of its contents. For read-write access,
external locking must be used. Such locking is typically done at the model level.INTERPOLATION_CIRCLE_BY_3POINTS, INTERPOLATION_CIRCLE_BY_CENTERPOINT, INTERPOLATION_CIRCULARARC_BY_3POINTS, INTERPOLATION_CIRCULARARC_BY_BULGE, INTERPOLATION_CIRCULARARC_BY_CENTERPOINT, INTERPOLATION_ELLIPTICAL, INTERPOLATION_GEODESIC, INTERPOLATION_LINEAR, INTERPOLATION_MIXED, INTERPOLATION_RHUMB
Constructor and Description |
---|
TLcdCompositeCurve() |
Modifier and Type | Method and Description |
---|---|
void |
clearCache()
Clears the cache.
|
Object |
clone()
Creates and returns a copy of this object, by delegating to
Object.clone() . |
void |
computePointSFCT(double aParam,
ILcd3DEditablePoint aPointSFCT)
Computes a point of the curve, defined by the given parameter.
|
boolean |
contains2D(double aX,
double aY)
Checks whether this
ILcdShape contains the given point in
the 2D space. |
boolean |
contains3D(double aX,
double aY,
double aZ)
Checks whether this
ILcdShape contains the given point in
the 3D space. |
boolean |
equals(Object aObject)
An object is considered equal to this shape if it has the same class.
|
ILcdBounds |
getBounds()
Returns the
ILcdBounds by which the geometry of this ILcdBounded object
is bounded. |
Object |
getCachedObject(Object aKey)
Looks up and returns the cached Object corresponding to the given key.
|
List<ILcdCurve> |
getCurves()
Returns a list with the curve's elements.
|
ILcdPoint |
getEndPoint()
Retrieves the end point of the curve.
|
double |
getEndTangent2D()
Returns the angle of the curve's tangent at the end point,
in degrees counterclockwise from the direction at 3 o'clock.
|
ILcdPoint |
getFocusPoint()
Returns the focus point of this
ILcdShape . |
String |
getInterpolation()
Returns the interpolation method used by this curve,
which is
ILcdCurve.INTERPOLATION_MIXED . |
double |
getLength2D(double aParam1,
double aParam2)
Returns the length between two points of the curve,
defined by the given parameters.
|
int |
getLineSegmentIntersectionCount(ILcdPoint aP1,
ILcdPoint aP2)
Returns the number of intersections between this curve and a line segment
defined by the two specified points.
|
ILcdPoint |
getStartPoint()
Retrieves the start point of the curve.
|
double |
getStartTangent2D()
Returns the angle of the curve's tangent at the start point,
in degrees counterclockwise from the direction at 3 o'clock.
|
double |
getTangent2D(double aParam)
Returns the angle of the curve's tangent in the point defined
by the given parameter, in degrees counterclockwise from the
direction at 3 o'clock.
|
int |
hashCode()
The hash code of this shape is the hash code of its class, in order to
be consistent with the
ALcdShape.equals(Object) method. |
void |
insertIntoCache(Object aKey,
Object aObject)
Inserts a cache Object corresponding to the given key Object.
|
Object |
removeCachedObject(Object aKey)
Looks up and removes the cached Object corresponding to the given key.
|
contains2D, contains3D, fromDomainObject
finalize, getClass, notify, notifyAll, toString, wait, wait, wait
contains2D, contains3D
public List<ILcdCurve> getCurves()
ILcdCompositeCurve
The returned list is not guaranteed to be editable. See ILcdEditableCompositeCurve
for an editable variant of this interface.
Note that this adding curves to the result of calling this method may throw a
ClassCastException
or IllegalArgumentException
in case the class of the curve(s) to add is not
compatible with the implementation of the composite curve. Implementations should
specify in their documentation all restrictions that apply in this context.
getCurves
in interface ILcdCompositeCurve
public ILcdPoint getStartPoint()
ILcdCompositeCurve
ILcdCurve.computePointSFCT(double, com.luciad.shape.shape3D.ILcd3DEditablePoint)
with parameter value 0.
In case of an empty composite curve, null
is returned.
getStartPoint
in interface ILcdCompositeCurve
getStartPoint
in interface ILcdCurve
public ILcdPoint getEndPoint()
ILcdCompositeCurve
ILcdCurve.computePointSFCT(double, com.luciad.shape.shape3D.ILcd3DEditablePoint)
with parameter value 1.
In case of an empty composite curve, null
is returned.
getEndPoint
in interface ILcdCompositeCurve
getEndPoint
in interface ILcdCurve
public double getStartTangent2D()
ILcdCurve
The tangent orientation is from the start point towards the rest of the shape.
This is the same as getTangent2D(0)
.
getStartTangent2D
in interface ILcdCurve
public double getEndTangent2D()
ILcdCurve
The tangent orientation is from the end point, away from the curve before it.
This is the same as getTangent2D(1)
.
getEndTangent2D
in interface ILcdCurve
public double getTangent2D(double aParam)
ILcdCurve
The tangent orientation is from the point at parameter aParam
towards the rest of the shape.
ILcdCurve.getStartTangent2D()
.ILcdCurve.getEndTangent2D()
.getTangent2D
in interface ILcdCurve
aParam
- a value of the closed interval [0,1]public double getLength2D(double aParam1, double aParam2)
ILcdCurve
aParam1 == aParam2
, the length is 0.aParam1 == 0 and aParam2 == 1
, the length is the whole length of the curve.aParam1 > aParam2
, the length is (aParam1 to 1
) + (0 to aParam2
).getLength2D
in interface ILcdCurve
aParam1
- a value of the closed interval [0,1]aParam2
- a value of the closed interval [0,1]public String getInterpolation()
ILcdCurve.INTERPOLATION_MIXED
.getInterpolation
in interface ILcdCompositeCurve
getInterpolation
in interface ILcdCurve
INTERPOLATION_MIXED
.public void computePointSFCT(double aParam, ILcd3DEditablePoint aPointSFCT)
ILcdCurve
ILcdCurve.getStartPoint()
.ILcdCurve.getEndPoint()
.computePointSFCT
in interface ILcdCurve
aParam
- a value of the closed interval [0,1]aPointSFCT
- the point to store the computed curve point inpublic ILcdPoint getFocusPoint()
ILcdShape
ILcdShape
.getFocusPoint
in interface ILcdShape
ILcdShape
.public boolean contains2D(double aX, double aY)
ILcdShape
ILcdShape
contains the given point in
the 2D space. Only the first two dimensions of the ILcdShape
are considered.contains2D
in interface ILcdShape
aX
- the x coordinate of the point.aY
- the y coordinate of the point.public boolean contains3D(double aX, double aY, double aZ)
ILcdShape
ILcdShape
contains the given point in
the 3D space.contains3D
in interface ILcdShape
aX
- the x coordinate of the point.aY
- the y coordinate of the point.aZ
- the z coordinate of the point.public Object clone()
ALcdShape
Object.clone()
. Extensions should delegate to this implementation
with super.clone()
, in order to create an object instance of
the right type, with all fields copied. They then should explicitly
clone any non-primitive fields for which a deeper clone is required.clone
in interface ILcdCloneable
clone
in class ALcdShape
Object.clone()
public boolean equals(Object aObject)
ALcdShape
public int hashCode()
ALcdShape
ALcdShape.equals(Object)
method.
Extensions should refine this implementation, based on their properties.public ILcdBounds getBounds()
ILcdBounded
ILcdBounds
by which the geometry of this ILcdBounded
object
is bounded.
If the geometry does not allow retrieving valid bounds (for example a polyline with 0 points)
the return value is unspecified.
It is highly recommended to return an undefined
bounds.
You can create undefined bounds using the default constructors
of TLcdLonLatBounds
or TLcdXYBounds
.
getBounds
in interface ILcdBounded
ILcdBounds
by which the geometry of this ILcdBounded
object
is bounded.public int getLineSegmentIntersectionCount(ILcdPoint aP1, ILcdPoint aP2)
ILcdCurve
This information can be used to perform containment calculations, if this curve is closed or if this curve is part of a composite closed curve. By determining the number of intersections between this curve and a line segment starting from a given point in a fixed direction, one can determine whether a point is located within the closed curve by using the even-odd rule.
getLineSegmentIntersectionCount
in interface ILcdCurve
aP1
- the first point of the line segmentaP2
- the second point of the line segmentpublic void insertIntoCache(Object aKey, Object aObject)
ILcdCache
insertIntoCache
in interface ILcdCache
aKey
- the key Object that will be used to identify the Object.
The key must therefore be a unique identifier, typically the caller
itself: insertIntoCache(this, ...)
.aObject
- the Object to be cached.public Object getCachedObject(Object aKey)
ILcdCache
getCachedObject
in interface ILcdCache
aKey
- the key Object that was used for storing the cache Object.public Object removeCachedObject(Object aKey)
ILcdCache
removeCachedObject
in interface ILcdCache
aKey
- the key Object that was used for storing the cache Object.public void clearCache()
ILcdCache
clearCache
in interface ILcdCache