Autodesk Revit is popular with architects, landscape architects, and structural engineers for creating building information models.

Figure 1, “Autodesk Revit example project” shows a sample project inside Autodesk Revit.

A default project in revit
Figure 1. Autodesk Revit example project

To start off, export your project to the IFC file format:

The export button location
Figure 2. Export your project to the IFC format

We recommend keeping the default export settings.

The export settings to use
Figure 3. Use these settings when exporting to IFC

Once you have finished exporting to the IFC format, see Handling IFC data for instructions for processing IFC data in LuciadFusion.

After following the steps described in Handling IFC data, you can create an OGC 3D Tiles service inside LuciadFusion Studio.

When we preview this in LuciadRIA, we can perform selection operations, as shown in Figure 4, “The resulting project in LuciadRIA with selection and metadata enabled by default.”:

The result in LuciadRIA with selection and metadata
Figure 4. The resulting project in LuciadRIA with selection and metadata enabled by default.

To enable selection of OGC 3D Tiles in LuciadRIA, see the guide about enabling selection in meshes in LuciadRIA.